ABB Inora Shaver Socket, 115/230V 20VA Royal Gold BL401-PG

The listed model is BL401-PG and is intended for an AC electrical installation. Because the supplied product title contains potentially ambiguous input and output voltage information, the installer must verify the voltage ratings printed on the socket, packaging and ABB technical documentation before connection. Never assume that a shaver socket has the same rating or load capacity as a standard 13A outlet.

No. A shaver socket is intended for compatible, low-power bathroom grooming appliances and must not replace a standard general-purpose outlet. Do not use it for hair dryers, kettles, vacuum cleaners, heaters or other high-load equipment. The connected appliance voltage and power demand must remain within the ratings marked on the product.

It can be suitable for UAE bathroom projects when its marked supply voltage, frequency and installation requirements match the project specification and local electrical regulations. Suitability also depends on the proposed bathroom zone, separation from water sources, enclosure conditions and protection provided by the circuit. Approval should be confirmed by the project consultant or a licensed UAE electrical contractor.

Install it only in a bathroom location permitted by the applicable wiring regulations and project drawings, away from direct water spray, shower areas and locations where it could be reached from a bath or shower when prohibited. Bathroom-zone restrictions, mounting height and required clearances must be checked against the latest local authority requirements and the project's adopted electrical standard.

Installation should be completed with the circuit isolated and proven dead. A qualified electrician should confirm the compatible back box and mounting depth, prepare and terminate the conductors according to the labelled terminals, verify earthing where required, secure the mechanism without trapping wires, fit the Royal Gold faceplate and carry out electrical safety tests before energising. ABB installation instructions and approved project shop drawings should always take priority.

The back-box format, dimensions and minimum depth must be confirmed from the ABB BL401-PG datasheet or the physical product before wall chasing, tiling or joinery work begins. The box should be rigid, level and flush with the finished surface, with enough internal space for safe cable bending and terminations. Early coordination prevents misalignment with bathroom tiles, mirrors, vanity units and decorative wall panels.

Bathroom circuits commonly require additional protection, including RCD protection, subject to the applicable UAE authority regulations and project design. The electrician must follow the approved distribution-board schedule, manufacturer instructions and the latest requirements of the relevant authority, such as DEWA, ADDC or the authority serving the project location. The shaver socket itself should not be treated as a substitute for circuit-level protection.

The specification should be reviewed against the current UAE electrical authority rules, approved project standards and relevant international or British wiring requirements adopted for the development. Depending on the product certification and project basis, this may include requirements relating to shaver supply units, bathroom locations, electric-shock protection and wiring installations. The consultant should verify the exact product certification and compliance documents before approval.

Yes, the Royal Gold appearance is well suited to premium villas, apartments, hospitality bathrooms and high-end fit-out work where electrical accessories must coordinate with gold-tone taps, sanitary fittings, mirrors and ironmongery. A physical sample should be approved before bulk ordering because perceived colour can vary with lighting, surrounding finishes and production batches.

MEP, architectural and interior teams should coordinate the socket position, back-box dimensions, cable route, final wall finish and access for termination before closing walls or completing tiling. Confirm that the outlet will not conflict with waterproofing systems, concealed pipework, mirror supports, vanity cabinets or splash zones. For larger UAE projects, include the approved model and finish in material submittals and inspection records.

Do not install it outdoors or where it will be exposed to rain, condensation, direct water jets or persistent moisture unless ABB explicitly states a suitable IP rating and the installation complies with local rules. The Royal Gold shaver socket is primarily intended for protected indoor locations. Wet or outdoor areas require accessories with an appropriate verified ingress-protection rating.

Isolate the supply before maintenance and wipe the faceplate with a soft, dry or slightly damp cloth. Do not use abrasive pads, metal polish, solvents, bleach or strong chemical cleaners, as they may damage the decorative finish or enter the socket. Periodically inspect for looseness, discoloration, cracking or overheating and arrange assessment by a qualified electrician if any defect is found.

Confirm the model number BL401-PG, Royal Gold finish, marked input and output ratings, socket configuration, back-box compatibility, required quantity and project approval status. Buyers should also check the connected appliance requirements and request the latest ABB datasheet or compliance documentation where needed for consultant approval, authority inspection or construction handover.