ABB Millenium 1 Gang 1 Way 10AX Premium Switch Stainless Steel AM10144-ST

The 1 gang configuration means the switch provides one control position for one circuit. The 1 way arrangement means that circuit is switched from one location only. If the same light must be controlled from two locations, such as at both ends of a corridor or staircase, a compatible 2 way switching arrangement is required instead.

The 10AX rating indicates that the switch is designed for switching compatible loads at up to its stated rating, including lighting loads that may produce higher inrush currents than a simple resistive load. The connected load, lamp driver, power factor and starting current must still be checked against ABB technical requirements and the electrical design before installation.

The ABB AM10144-ST is rated at 250V AC. This is compatible with typical UAE low-voltage building installations when selected and installed as part of a properly designed circuit. The actual supply, circuit protection, load characteristics and local authority requirements must be verified by a qualified electrician.

It can be used to control a compatible lighting circuit from one location in villas, apartments, offices, hotels, retail spaces and other building interiors. Typical applications include bedrooms, living rooms, meeting rooms and individual office areas. Suitability for a specific project depends on the connected load, installation environment and approved electrical specifications.

It may be used with compatible LED lighting systems, but suitability depends on the LED driver's inrush current, power factor and total connected load. The combined wattage alone is not always sufficient for selecting a switch because some LED drivers draw a high current at startup. Confirm the driver data and ABB switching limits, particularly where several luminaires operate from one switch.

The switch is intended for flush mounting, with the mechanism and fixed wiring concealed behind the finished wall surface. Installation generally involves isolating and proving the circuit dead, confirming the correct back box and conductors, terminating the supply and switched-live wires according to the ABB wiring diagram, securing the mechanism, fitting the compatible frame or cover and completing electrical safety tests. Installation must be performed by a qualified electrician.

Check the approved electrical drawings, circuit type, 250V AC supply, connected load, 10AX rating, cable size, back-box compatibility, wall finish depth and the required ABB Millenium frame or accessory combination. The product dimensions are listed as 42 x 86 x 86 mm, with an 86 mm width, but the project team should verify the exact mounting cut-out, box depth and accessory compatibility from current ABB documentation before procurement.

A conventional 1 way mechanical lighting switch normally interrupts the live conductor and may not require a neutral connection at the switch position. However, wiring arrangements vary between projects. Follow the terminal markings, ABB installation instructions and approved circuit drawing; never connect conductors based only on colour without testing and identification.

No. This model has a 1 way contact arrangement and is intended to control one circuit from one location. For staircases, corridors, large rooms or other areas requiring control from two positions, use suitable 2 way switches and the correct interconnection wiring specified by the electrical designer.

Do not assume that the stainless-steel finish makes the switch weatherproof or suitable for wet locations. Use it only where its documented ingress-protection rating and installation conditions meet the project requirements. Bathrooms, external walls, gardens and exposed areas may require dedicated IP-rated accessories, suitable enclosures and compliance with applicable electrical-zone rules.

Its 250V AC rating, 10AX switching capacity, flush-mounted format and premium finish suit many UAE residential, commercial and hospitality fit-out applications. Final acceptance depends on the consultant's approved material submittal, project specifications and requirements of the relevant UAE authority, such as DEWA or the applicable emirate distribution company. Any required conformity documentation should be confirmed before project approval.

The complete installation should comply with the latest applicable UAE electrical regulations, local distribution-authority requirements, project specifications and approved wiring practices. Depending on the project, relevant references may include authority regulations, BS 7671-based design requirements and the applicable switch product standard, such as BS EN or IEC 60669-1. Confirm the exact product certification and project acceptance documentation with ABB, the consultant and the local authority.

Use only the designated terminals shown in the ABB wiring instructions, prepare conductors without damaging them and tighten connections to the manufacturer's specified torque where provided. After installation, a qualified electrician should inspect termination security and perform the required continuity, insulation-resistance, polarity, functional and protective-device checks before energising the circuit.

Confirm the compatible ABB Millenium mounting support, frame, cover plate or other finishing components required for the selected wall box and interior design. Matching appearance does not guarantee mechanical compatibility across different ABB ranges. Review the current ABB accessory references and the FEPY product listing before ordering, especially for multi-device or project-standard configurations.