ABB Millenium 13A Double Pole Double Switched Socket Mocha Brown AM239147-MO

Key specifications include a 13A rated current, 250V AC rated voltage, two-gang configuration, dual BS 13A socket outlet, double-pole switching and flush-mounted installation. The listed overall dimensions are approximately 42 x 147 x 86 mm. Installers should verify the wall box size, mounting depth and wiring space against the project drawings before installation.

Yes. Its BS-style 13A outlet format is commonly used in UAE residential and commercial construction, while the 250V AC rating is compatible with typical UAE low-voltage supply conditions. Final selection and installation must comply with the applicable UAE electrical regulations, local authority requirements, project specifications and the instructions supplied by ABB.

Double-pole switching disconnects both the live and neutral conductors when the outlet is switched off. This provides more complete local isolation than single-pole switching and can be beneficial for appliance control, maintenance and electrical safety. It does not replace proper circuit isolation at the distribution board before electrical work is carried out.

This socket is suitable for indoor fixed electrical installations in villas, apartments, offices, hotels, retail units and other commercial properties. It can serve common 13A plug-in appliances and equipment where the connected load is within the circuit and outlet ratings. The mocha brown finish is particularly relevant to premium interiors, timber finishes and coordinated dark-colour electrical accessories.

The unit is designed for flush mounting, with the fixed wiring and mounting box concealed behind the finished wall. Installation generally involves isolating and proving the circuit dead, checking the compatible back box and cable capacity, terminating live, neutral and earth conductors at the marked terminals, securing the socket without trapping cables, fitting the matching frame and conducting the required electrical tests. Installation should be completed by a qualified electrician.

Contractors should confirm the approved accessory schedule, circuit rating, conductor size, earthing arrangement, protective device, RCD requirements, back-box dimensions, mounting depth and wall finish allowance. They should also coordinate the socket position with joinery, furniture, kitchen equipment and MEP drawings. A sample installation may be useful to verify the mocha brown finish and frame alignment before bulk installation.

No. The connected equipment must remain within the socket's 13A rating and the design limits of the final circuit. High-load or permanently connected equipment may require a dedicated circuit, isolator or fused connection unit rather than a standard plug socket. A qualified electrical engineer or electrician should assess simultaneous loading and circuit protection for project applications.

Yes. A protective earth conductor must be correctly terminated wherever required by the outlet design and installation system. Earth continuity, polarity, insulation resistance and protective-device operation should be tested after installation in accordance with the applicable project and local electrical requirements. The socket must not be used if the earthing arrangement is incomplete or defective.

This flush-mounted socket should not be assumed to be weatherproof or suitable for wet areas because no IP protection rating is stated in the supplied product data. Bathroom, wash-area and outdoor installations require careful assessment of location zones, ingress protection, RCD protection and local regulations. Use an appropriately rated weatherproof or water-resistant outlet where exposure to moisture, dust or rain is possible.

Flush mounting conceals the fixed wiring and back box within the wall, creating a clean finish for blockwork, drywall and completed interior surfaces. It is widely used in UAE villas, apartments, offices and hospitality fit-outs. Correct coordination is important because plaster, tile, stone or decorative cladding thickness can affect box depth, frame seating and the final alignment of the accessory.

The installer should carry out tests appropriate to the completed circuit, including protective conductor continuity, insulation resistance, polarity, earth-fault loop or equivalent verification, and operation of the relevant protective devices and RCD where fitted. Both switched outlets should also be functionally checked. Testing and certification should follow the applicable UAE authority requirements and approved project procedures.

Switch off the circuit before inspection or cleaning. Wipe the external surface with a soft, dry or lightly damp cloth and avoid abrasive pads, solvents, strong chemicals and excessive water. If the outlet becomes loose, discoloured, unusually warm, cracked or produces intermittent power, stop using it and arrange inspection by a qualified electrician.

The product combines a dual 13A outlet configuration, local switching, double-pole isolation, secure fixed-wiring terminals and concealed flush installation. Its mocha brown finish supports coordinated architectural specifications, while the ABB Millenium range is suitable for buyers seeking a professional electrical accessory for residential, commercial and hospitality construction projects in the UAE.