ABB Millenium 13A Double Pole Double Switched Socket Silk Black AM239147-SB

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off, providing more complete local isolation than a single-pole switch. The protective earth connection remains continuous. Correct conductor identification and termination must be verified during installation.

Yes. Its dual BS 13A socket format, 250V AC rating and 50Hz compatibility are appropriate for the British-style plug system widely used in the UAE. Final selection and installation must comply with the applicable requirements of the local authority, project specifications and relevant wiring regulations.

It is suitable for compatible BS 1363 fused plugs used with televisions, computers, chargers, small kitchen appliances, office equipment and other indoor electrical loads. The connected load must remain within the socket rating and the capacity of the supplying circuit. High-load fixed appliances should use the connection method specified by the appliance manufacturer and electrical design.

Both outlets may be used simultaneously when the total demand remains within the limits of the branch circuit, protective device, wiring and socket arrangement. Contractors should assess load diversity and avoid connecting multiple high-current appliances if doing so could overload the circuit.

The listed overall dimensions are approximately 42 x 147 x 86 mm, with a stated width of 147 mm. Before installation, confirm the required wall-box dimensions, fixing centres and available back-box depth against the ABB Millenium product documentation and the selected mounting accessories.

The socket is designed for flush mounting, with the fixed wiring and compatible back box concealed behind the finished wall. Installation involves isolating the circuit, verifying it is de-energised, preparing the conductors, terminating live, neutral and earth in the marked terminals, securing the mechanism and frame, and completing the required electrical tests before energisation. Installation should be carried out by a qualified electrician.

Use a compatible flush back box that provides the correct fixing arrangement, sufficient depth and adequate space for conductors without sharp bending or terminal strain. Compatibility should be confirmed using ABB Millenium technical documentation because decorative accessory dimensions do not by themselves establish the required back-box specification.

Cable size cannot be selected from the socket rating alone. A qualified electrical designer or electrician must consider the circuit arrangement, protective-device rating, installation method, cable length, grouping, ambient temperature and voltage drop. This is particularly important in UAE construction projects, where high ambient temperatures can affect cable current-carrying capacity.

Yes, the protective earth conductor must be correctly connected and verified; it must never be switched or omitted. RCD or RCBO protection should be provided where required by the applicable UAE authority, wiring regulations, project design and intended location. The socket's double-pole switches do not replace circuit protection or residual-current protection.

This model should be treated as an indoor flush-mounted wiring accessory unless ABB documentation confirms a suitable ingress-protection rating. In kitchens, bathrooms, utility areas, balconies or outdoor locations, the required IP rating, installation zone and RCD protection must be assessed. Use a specifically rated weatherproof socket where exposure to water, dust, humidity or harsh site conditions is expected.

The Silk Black finish suits modern villas, apartments, offices, hotels, retail spaces and premium fit-out projects. It pairs well with dark joinery, stone, metal and contemporary wall finishes. During construction, protect the faceplate from paint, cement dust, abrasive cleaning products and impact damage.

The electrician should perform the tests required by the applicable installation standard and local authority, including protective-conductor continuity, insulation resistance, polarity, earth-fault protection checks and RCD or RCBO testing where fitted. Each switch and outlet should also be functionally checked before the circuit is handed over.

Switch off and isolate the supply before inspection or cleaning. Wipe the surface with a soft, dry or lightly damp cloth and avoid solvents, abrasive pads and aggressive chemicals that may damage the finish. If there is overheating, discolouration, cracking, looseness, buzzing or a burning smell, stop using the socket and have it inspected by a qualified electrician.