ABB Millenium 13A Double Pole Double Switched Socket White Glass AM239147-WG

Yes, its 250V AC rating and BS-style 13A socket configuration are suitable for many UAE residential, commercial and hospitality projects operating on the local 230V, 50Hz supply. The complete installation must still comply with the project specification and the requirements of the relevant UAE authority, such as DEWA, ADDC, SEWA or the applicable local utility and municipality.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching and is useful where the electrical design, appliance type or project specification calls for simultaneous live and neutral disconnection.

It can be used with compatible BS 13A plugs for equipment such as televisions, computers, chargers, office devices, small kitchen appliances and general construction-site office equipment. The connected load must remain within the socket's documented 13A and 250V AC ratings, and high-load equipment should only be connected after confirming circuit capacity and the appliance manufacturer's requirements.

Yes. The socket is suitable for specified indoor applications in villas, apartments, offices, hotels, retail spaces and other completed building interiors. Its white glass finish is particularly relevant to premium fit-out projects where the appearance of wiring accessories must coordinate with modern wall finishes.

The unit is designed for flush mounting. Installation generally involves isolating and verifying the circuit as dead, preparing a compatible recessed wall box, terminating live, neutral and earth conductors at the marked terminals, securing the socket mechanism, fitting the matching frame and completing electrical safety tests. Installation should be performed by a qualified electrician in accordance with approved drawings and local regulations.

A compatible flush back box with sufficient depth is required to accommodate the mechanism, conductors and safe cable bending. The product dimensions are approximately 42 x 147 x 86 mm, but the installer should verify the required wall-box format, fixing centres, finished-wall opening and available depth before cutting blockwork, drywall, tile or decorative cladding.

Cable size, circuit arrangement, earthing and protective-device rating must be selected by the electrical designer or qualified electrician according to the connected load, installation method, cable length, ambient temperature and applicable regulations. The socket's 13A rating does not replace the need for correctly coordinated MCB or RCBO protection and suitable residual-current protection where required.

Yes, the terminal arrangement is designed to support dependable fixed-wiring connections when conductors are correctly prepared and tightened. The electrician should follow the manufacturer's terminal markings and torque guidance, avoid exposed copper, confirm earth continuity and inspect each connection before energising the circuit.

No ingress-protection rating is provided in the listed product information, so it should not be assumed suitable for exposed outdoor, wet or high-moisture locations. Bathroom, wash-area and outdoor installations require accessories with an appropriate IP rating, correct zoning and suitable RCD protection as specified by UAE regulations and the project consultant.

The electrician should check conductor identification, terminal tightness, earth continuity, polarity, insulation resistance and the operation of both switches. The relevant protective device and RCD or RCBO should also be tested, and the faceplate should sit level without trapped conductors, movement, chips or excessive stress on the white glass surface.

Key specifications include a 13A rated current, 250V AC rated voltage, dual BS 13A socket outlets, double-pole switching, two-gang configuration, flush-mounted installation and approximate dimensions of 42 x 147 x 86 mm. The model number is AM239147-WG, and the decorative finish is white glass.

Switch off and isolate the circuit before maintenance. Clean the glass surface with a soft, dry or lightly dampened non-abrasive cloth, and do not allow liquid to enter the socket openings or switch mechanism. Avoid solvents, abrasive pads and harsh construction chemicals, and replace the accessory if the glass, switches or socket contacts become damaged.

Contractors should verify the approved brand and model schedule, BS plug compatibility, circuit voltage, load requirements, double-pole isolation requirement, flush-box compatibility, wall finish and required quantity. They should also confirm consultant approval and compliance with the current regulations of the relevant UAE utility, municipality and project authority before procurement and installation.