ABB Millenium 13A Double Pole Double Switched Socket with LED Silk Black AM240147-SB

This ABB Millenium socket is rated at 13A and 250V AC. It features two BS 13A socket outlets, double-pole switching, an LED indicator, secure fixed-wiring terminals and flush mounting. Its stated dimensions are approximately 42 x 147 x 86 mm; the dimensions and compatible mounting box should be checked before installation.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching, although it does not replace isolation at the distribution board before electrical installation, inspection or maintenance.

Yes, it is relevant to UAE projects because it is designed for BS-type 13A plugs commonly used with the UAE Type G socket system and is rated at 250V AC. The circuit design, wiring, earthing, protective device and installation must still comply with the applicable UAE authority requirements, project specifications and manufacturer instructions.

The integrated LED provides a clear visual indication of the socket or connected-circuit status. This can be useful in homes, offices, hotels, retail units and other buildings where users need to identify an energised or switched-on outlet quickly. The exact LED behaviour should be confirmed from the ABB wiring instructions supplied with the product.

It is suitable for dry indoor locations such as living rooms, bedrooms, offices, meeting rooms, hotel rooms, reception areas and selected retail interiors. Typical applications include approved 13A plug-in appliances, IT equipment, lamps and general electrical accessories, provided the connected load remains within the circuit and socket ratings.

Only equipment fitted with a compatible BS 13A plug and operating within the socket, plug and circuit ratings should be connected. Heavy-duty construction machinery, large motors, welders and equipment with high starting current may require dedicated industrial outlets and appropriately designed circuits. A qualified electrical engineer should assess the load before use.

The unit is designed for flush installation, with the wiring and mounting box concealed behind the finished wall. Installation generally involves isolating the supply, confirming the circuit is dead, preparing a compatible box, terminating live, neutral and earth conductors in the designated terminals, securing the accessory and testing it. Installation should be completed by a qualified electrician in accordance with ABB instructions and local regulations.

Confirm the wall box dimensions, required installation depth, cable capacity, earthing provision, terminal identification and compatibility with the ABB Millenium frame or associated components. The electrician should also verify circuit protection, conductor size, polarity and the available space behind the accessory, particularly in blockwork, drywall partitions and fit-out systems.

The product information states that a matching frame completes the installed finish, but package contents can vary by listing or project configuration. Buyers should verify whether the required ABB Millenium frame and mounting box are included or need to be ordered separately before installation.

This listing does not state an IP rating, so it should be treated as an indoor accessory for dry locations unless ABB documentation confirms otherwise. Installation near water, in bathrooms, outdoors or in dusty construction environments requires an accessory with the appropriate IP rating, location zoning and protection required by local regulations.

The silk black finish complements modern dark hardware, luxury residential interiors, hotel rooms, executive offices and premium retail fit-outs. For multi-unit construction projects, contractors should approve a sample to confirm colour consistency, frame compatibility and coordination with wall finishes, joinery and other electrical accessories.

The socket must be connected to a correctly designed final circuit with suitable overcurrent protection, earthing and any residual-current protection required by the applicable authority, location and project specification. The 13A marking is the socket rating and must not be used as the sole basis for circuit design; conductor size, installation method, load demand and protective devices must be assessed by a qualified professional.

A qualified electrician should perform the inspections and tests required for the installation, including protective-conductor continuity, insulation resistance, polarity, earth-fault protection and functional operation of both switches and the LED indicator. Test results should be recorded where required for project handover, authority inspection or facilities-management documentation.

Switch off and safely isolate the circuit before maintenance. Clean the faceplate with a soft, dry or lightly damp cloth and avoid abrasive cleaners, solvents and excessive moisture. If the socket becomes loose, discoloured, cracked, unusually warm or produces intermittent power, stop using it and arrange inspection by a qualified electrician.