ABB Millenium 13A Double Pole Double Switched Socket with LED White Glass AM240147-WG

The socket has a rated current of 13A and a rated voltage of 250V AC. It features a dual BS 13A outlet configuration, double-pole switching, an LED status indicator and secure fixed-wiring terminals. The stated overall dimensions are approximately 42 x 147 x 86 mm, and the unit is designed for flush-mounted installation.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching and is particularly useful in fixed electrical installations where enhanced control and isolation are required. The circuit must still be isolated at the distribution board before inspection or maintenance.

Its 13A BS-type outlet format and 250V AC rating are generally suitable for the 230V, 50Hz electrical supply used in the UAE. Final selection and installation should comply with the applicable requirements of the relevant UAE authority, such as DEWA, ADDC or the local emirate's utility regulations, together with BS 7671 where specified by the project consultant.

It can supply compatible BS 1363 fused-plug appliances within the capacity of the socket and its protected final circuit, including televisions, computers, chargers, lamps and suitable household or office equipment. High-load appliances should only be connected after confirming their current demand, plug rating, circuit design and manufacturer requirements. The combined connected load must not exceed the limits of the socket assembly or supplying circuit.

The socket is intended for flush mounting in a compatible wall box. A qualified electrician should isolate the supply, verify safe isolation, confirm the box size and depth, terminate live, neutral and earth conductors at the correctly marked terminals, secure the mechanism without trapping cables, fit the matching frame and then perform the prescribed electrical tests before energising the circuit. Installation should follow ABB instructions and the approved project wiring design.

Use a compatible flush box that accommodates the socket's approximately 147 mm width, 86 mm height and 42 mm depth, with additional space for safe cable bending and terminal access. Cable conductor size, circuit protection, earthing and installation method must be selected according to the circuit load, UAE authority requirements and the approved electrical design. Box compatibility should be checked before wall cutting or first-fix work.

The integrated LED provides a clear visual indication of the switch or connected-circuit status, making operation easier in homes, offices, hotels and other managed buildings. The exact illumination behaviour should be verified after installation against the product wiring instructions, as indicator operation can depend on the internal configuration.

The socket is primarily intended for dry indoor locations. In kitchens, it should be positioned away from sinks, heat sources and areas exposed to splashing, following applicable electrical-zone and project requirements. It should not be installed outdoors, in bathrooms or in wet and dusty construction environments unless it is housed within a suitably rated enclosure and the complete installation meets the required IP protection and local regulations.

The combination of a BS-type 13A outlet, 250V AC rating, double-pole isolation, LED indication and premium white-glass finish suits many UAE villas, apartments, offices, hospitality developments and high-end fit-out projects. Its flush profile supports contemporary interiors, while ABB branding can assist consultants and contractors seeking coordinated wiring accessories from an established electrical manufacturer.

Both outlets may be used simultaneously provided the connected equipment remains within the rated capacity of the socket assembly and the protected final circuit. Contractors should assess total demand, cable capacity, protective-device rating and any applicable diversity factors. Extension leads, multi-plug adaptors and high-load appliances should not be used in a way that could overload the outlet or circuit.

A qualified electrician should complete the tests required by the applicable wiring regulations and project specification. These normally include continuity of protective conductors, insulation resistance, polarity, earth-fault loop impedance, protective-device verification and RCD operation where an RCD is required. The LED and both switching functions should also be checked before handover.

Switch off and safely isolate the circuit before maintenance. Clean the glass face with a soft, lightly damp cloth and avoid abrasive pads, solvents, strong chemicals or excessive moisture around the switches and outlet apertures. Arrange inspection by a qualified electrician if there is cracking, looseness, discoloration, overheating, buzzing, intermittent operation or damage to the terminals or frame.

Yes, it can be specified for new-build electrical first-fix and second-fix works or used in refurbishment projects where the wall box, circuit arrangement and wiring are compatible. For replacement work, verify the existing box dimensions, mounting points, conductor condition, earthing provision and available installation depth before removing the old accessory.