ABB Millenium 13A Double Pole Single Switched Socket Dune Sand AM23786-DU

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching and is useful for appliances and circuits where enhanced isolation is required. The protective earth conductor remains permanently connected.

Yes. Its BS 13A socket configuration and 250V AC rating are suitable for many UAE residential and commercial applications, where British-style 13A plugs are widely used. The complete installation must still comply with the current requirements of the relevant UAE authority, such as DEWA, ADDC, SEWA or the applicable local distribution company, as well as the project specifications.

The socket is intended for compatible 13A plug-connected equipment operating within the circuit and outlet ratings. Typical uses include computers, televisions, small office equipment and domestic appliances. Actual connected load must not exceed 13A, and high-demand equipment such as water heaters, cookers or large air-conditioning units may require a dedicated circuit or connection unit specified by an electrical engineer.

The socket is designed for flush mounting, with the wiring and mounting box concealed behind the finished wall. Installation generally involves isolating and proving the circuit dead, preparing the compatible wall box, terminating live, neutral and earth conductors at the marked terminals, securing the mechanism without trapping cables, fitting the matching frame and completing electrical tests before energising. Installation should be carried out by a qualified electrician.

The product measures approximately 86 x 86 mm on the wall and has a stated overall depth of approximately 35 mm. A compatible flush box must provide adequate internal depth for the mechanism, conductor bend radius and safe terminal clearance. Contractors should confirm the ABB Millenium box and frame compatibility before blockwork, drywall closure or final fit-out.

Yes, provided a suitable flush mounting box and installation method are selected for the wall construction. For concrete or blockwork, the box should be securely recessed and aligned before plastering. For gypsum partitions, use an appropriate drywall box or support system. The finished box must be level, stable and flush with the final wall surface.

Cable size must be determined from the circuit design, protective device, installation method, ambient temperature, grouping, voltage drop and applicable UAE wiring requirements. Common socket circuits may use copper conductors sized by the project consultant or electrician, but no cable size should be selected solely from the socket's 13A rating. Confirm that the chosen conductors also fit the product terminals correctly.

Yes, the protective earth conductor must be securely connected to the designated earth terminal and continuity must be verified. RCD or RCBO protection may also be required depending on the circuit location, intended use and current UAE authority regulations. The electrician should confirm polarity, earth continuity, insulation resistance and protective-device operation during commissioning.

This standard flush-mounted socket should only be installed where the required environmental and ingress protection conditions are met. In kitchens, bathrooms, wash areas or outdoor locations, moisture, splash zones and local authority requirements must be considered. Use a suitably rated weatherproof or higher-IP accessory where exposure to water, dust or humidity is expected.

Yes. Its understated Dune Sand finish, concealed flush installation and single-gang format suit villas, apartments, offices, hotels and other interior fit-out projects. For large construction schedules, confirm that the socket mechanism, mounting box, frame and other ABB Millenium accessories share the required range, finish and configuration.

The electrician should check terminal tightness, conductor identification, polarity, earth continuity, insulation resistance, mounting security and switch operation. The circuit protective device and RCD or RCBO arrangement should also be verified against the approved design. Any project-specific inspection, testing and certification required by the consultant or local UAE authority must be completed.

Isolate the electrical supply before inspection or maintenance. Clean the visible surface with a soft, dry or slightly damp cloth and avoid abrasive pads, solvents or harsh chemicals that may damage the Dune Sand finish. Replace the accessory if there are signs of overheating, cracking, loose terminals, arcing, discolouration or unreliable switching.

Confirm the model number AM23786-DU, 13A rated current, 250V AC rating, double-pole switching, 1-gang layout, flush-mounted installation and Dune Sand colour against the approved material submittal. Also verify compatibility with the specified ABB Millenium frame, wall box, wiring system and local authority requirements before procurement and installation.