ABB Millenium 13A Double Pole Single Switched Socket Mocha Brown AM23786-MO

The socket has a rated current of 13A, a rated voltage of 250V AC, a BS 13A outlet configuration and a double-pole switching mechanism. It is designed for concealed flush mounting and measures approximately 86 x 86 mm across the face, with a stated overall depth of approximately 35 mm. Actual back-box depth and wiring space should be checked before installation.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete isolation than a single-pole switch, which normally interrupts only the live conductor. The protective earth connection remains continuous and must not be switched.

Yes, its BS-style 13A socket format and 250V AC rating are relevant to electrical installations commonly used in the UAE. Suitability for a specific project must still be confirmed against the approved electrical drawings, connected load, local authority requirements and project specifications. Installation should follow applicable UAE regulations and the requirements of the relevant electricity authority, such as DEWA, ADDC or the local emirate authority.

It is suitable for indoor fixed electrical installations in villas, apartments, offices, hotels, retail spaces and other commercial buildings. Typical applications include supplying approved 13A plug-in appliances, electronics and general-purpose equipment within the designed circuit capacity. It is not intended for direct outdoor, wet-area or exposed installation unless installed within a suitably rated protective enclosure approved for that environment.

Only when the appliance load, plug type, circuit design and manufacturer instructions are compatible with a 13A socket outlet. Many fixed air conditioners, water heaters, cookers and other high-power appliances require dedicated circuits and appropriately rated isolators rather than a standard 13A socket. A qualified electrician or electrical engineer should verify the connected load and protective device before use.

The unit is installed flush into a compatible concealed wall box, with the permanent wiring terminated at the identified live, neutral and earth terminals. The circuit must be isolated and proven dead before work begins. Conductors should be prepared correctly, terminals tightened to the manufacturer's requirements and the faceplate aligned without trapping or damaging cables. Installation, testing and energisation should be completed by a qualified electrician.

Use a compatible single-gang concealed back box that matches the 86 x 86 mm faceplate format and provides adequate depth for the socket body, cable bends and terminal connections. As the product depth is stated as approximately 35 mm, the selected box should offer sufficient working clearance rather than merely matching the device depth. Confirm screw centres, wall finish thickness and box compatibility before procurement.

Cable conductor size and protective-device rating must be determined from the approved circuit design, installation method, ambient temperature, grouping, voltage drop and fault protection requirements. UAE ceiling voids and service areas can experience elevated temperatures, so derating may be necessary. The 13A outlet rating must not be treated as the sole basis for cable selection; the project electrical engineer or qualified electrician should specify the complete circuit.

Yes. Its concealed flush-mount design is suitable for new villas, apartment developments, offices, hotels and interior fit-out projects where coordinated wiring accessories are specified. Contractors should confirm the model number AM23786-MO, mocha brown finish, back-box dimensions, circuit schedule and approved material submittal before bulk installation.

The electrician should check conductor identification, terminal tightness, earth continuity, polarity, insulation resistance and the operation of both switched poles. The socket should also be inspected for secure mounting, correct alignment and damage. Required circuit protective-device and RCD performance tests should be completed in accordance with the project specification and applicable local electrical regulations before handover.

No. Mocha brown is the decorative finish and does not change the stated 13A, 250V AC electrical rating or double-pole switching function. It is intended to coordinate with darker wall finishes, timber details and matching ABB Millenium wiring accessories. Avoid abrasive cleaners and strong solvents that could damage or discolour the visible surface.

This flush-mounted socket should be treated as an indoor wiring accessory unless ABB documentation confirms a suitable ingress-protection rating for the intended location. Outdoor, bathroom, wash-area and other damp installations require careful zoning, RCD protection and accessories or enclosures with an appropriate IP rating. Local regulations and project requirements must be checked by a qualified electrical professional.

Verify the manufacturer as ABB, the Millenium range, model AM23786-MO, SKU 82128-NOS, 13A rated current, 250V AC rating, single-gang BS socket configuration, double-pole switch, flush mounting and mocha brown finish. Cross-check these details against the electrical accessory schedule, interior finish schedule and approved project submittal before ordering.