ABB Millenium 13A Double Pole Single Switched Socket Stainless Steel AM23786-ST

Double-pole switching means the socket switch disconnects both the live and neutral conductors simultaneously. This provides more complete local isolation than a single-pole switch, subject to correct wiring and earthing. The protective earth conductor remains permanently connected and must not be switched.

It is a single, 1-gang 13A socket outlet. The term double pole refers to the switching method, not the number of plug outlets: its switch controls both live and neutral conductors together.

Yes, its BS 13A socket format, 250V AC rating and 50Hz-compatible application suit the British-style plug system commonly used in the UAE. Installation must still comply with the applicable UAE authority requirements, project specifications and relevant wiring regulations, and should be completed by a qualified electrician.

It is intended for compatible appliances fitted with a standard BS 1363-type 13A plug, provided the connected load does not exceed the socket rating or the protected circuit capacity. Typical applications include office equipment, televisions and suitable domestic appliances. High-load equipment should be checked against its nameplate current and the electrical design before connection.

Do not select this socket solely because a load appears to be below 13A. Air conditioners, water heaters, pumps and other fixed or high-load equipment may require a dedicated circuit, suitably rated isolator, connection unit or protection device because of starting current and local regulations. A qualified electrical engineer or electrician should confirm the correct accessory and circuit design.

The unit is intended for flush mounting, with the fixed wiring and compatible mounting box concealed behind the finished wall. Installation generally involves isolating and proving the circuit dead, confirming the box depth and conductor condition, terminating live, neutral and earth in the marked terminals, securing the mechanism and matching frame, and performing the required electrical tests before energising. Installation should only be carried out by a qualified electrician.

The face dimensions are 86 x 86 mm and the stated overall depth is 35 mm. Before construction or fit-out work begins, the installer should verify the compatible ABB Millenium mounting arrangement, frame, box dimensions, screw centres, terminal clearance and cable bend radius. The back box must be deep enough to prevent conductor compression and provide safe termination space.

Cable size and protective devices must be selected according to the circuit arrangement, connected load, installation method, ambient temperature, grouping and voltage-drop requirements. The socket rating does not by itself determine conductor size or breaker rating. UAE projects should follow approved drawings, applicable authority rules and relevant standards such as BS 7671 where specified, including required earthing and additional RCD protection.

The stainless steel finish provides a durable appearance, but it does not by itself establish an IP weatherproof rating. Do not install the socket where it may be exposed to rain, direct water spray, condensation or prohibited bathroom zones unless the complete installation has the required IP rating and complies with local regulations. Outdoor or wet-area projects normally require a purpose-designed weatherproof socket.

All protective-earth connections must be completed exactly as indicated by ABB and the applicable wiring regulations. Where a metal front plate, mounting arrangement or back box requires bonding or an earth connection, the electrician must provide and test it. Earth continuity, polarity, insulation resistance and protective-device operation should be verified before the socket enters service.

Flush mounting conceals the back box, terminals and fixed wiring behind the finished wall, producing a neat result for villas, apartments, offices, hotels and retail interiors. It also coordinates well with blockwork, gypsum partitions and joinery when box position and depth are planned before plastering, tiling or final wall finishes.

Switch off and isolate the electrical supply before maintenance. Clean the visible surface with a soft, dry or lightly damp cloth, then wipe it dry. Avoid abrasive pads, aggressive chemicals and excessive moisture, as these may damage the stainless finish or enter the mechanism. Arrange electrician inspection if the socket becomes loose, discoloured, cracked, unusually warm or produces arcing sounds.

Confirm the model number AM23786-ST, 1-gang outlet configuration, 13A and 250V AC ratings, BS 13A connector type, double-pole switching, stainless steel finish, 86 x 86 mm face size and flush-mounted installation requirement. Also verify frame and back-box compatibility, project-approved finishes, required quantities and compliance with the electrical consultant's specification.