ABB Millenium 13A Double Pole Switched Socket with LED Antique Gold AM23886-AG

This ABB Millenium socket is rated at 13A and 250V AC. It features a BS 13A socket outlet, double-pole switching, LED status indication, secure cable terminals and flush mounting. Its stated dimensions are approximately 35 x 86 x 86 mm, with an 86 mm face width.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching, subject to correct wiring and circuit design. The protective earth conductor remains permanently connected and must never be switched.

The integrated LED provides a clear visual indication of the socket or connected-circuit status. This is useful in homes, offices, hotels and other buildings where users need to identify quickly whether power is available at the outlet. The exact indication should be confirmed after installation and testing.

Its 250V AC rating and BS-style 13A outlet format are relevant to common UAE low-voltage installations. However, suitability depends on the approved project specification, wiring system and requirements of the applicable UAE authority, such as DEWA, ADDC or the relevant local utility. A licensed electrician should verify compliance before installation.

It can supply compatible appliances fitted with an appropriate BS-style fused plug, provided the circuit and connected load remain within the socket's 13A rating. Typical applications include televisions, computers, lamps and small household or office appliances. High-load or fixed equipment should be checked against its nameplate current and project requirements before connection.

Do not select the socket solely because it is rated at 13A. Air conditioners, water heaters, ovens and similar loads may require a dedicated circuit, isolator, connection unit or higher-rated outlet. The equipment nameplate, starting current, manufacturer instructions, cable capacity and protective-device rating must be assessed by a qualified electrician.

The socket is intended for flush mounting in a compatible wall box. Installation involves isolating and proving the circuit dead, confirming the conductor identification and cable condition, terminating live, neutral and earth in the marked terminals, securing the mechanism without trapping wires, fitting the matching frame and completing electrical tests before energising. Installation should be performed by a licensed electrician.

Use a compatible flush box that suits the 86 x 86 mm face format and provides sufficient internal depth for the approximately 35 mm product depth, cable bends and terminal clearance. Actual box depth should be confirmed against site wiring, conductor size and the ABB installation instructions. Avoid forcing conductors behind the mechanism.

Cable size and protective-device selection must be based on the circuit design, installation method, ambient temperature, grouping, voltage drop and local authority requirements. The socket rating does not by itself determine the cable or breaker size. UAE projects commonly reference relevant local regulations and BS 7671 principles where specified, so final selection should be made by the project electrical engineer or licensed contractor.

Yes, the antique gold finish and concealed flush-mounted design make it suitable for premium villas, apartments, hotels, offices and retail fit-outs where electrical accessories must coordinate with the interior finish. Contractors should confirm the model number AM23886-AG, finish, wall-box compatibility and approved material schedule before bulk ordering.

The supplied data does not state an outdoor or ingress-protection rating. It should therefore be treated as an indoor accessory unless ABB documentation and the project specification confirm otherwise. Outdoor, bathroom, wash-area or exposed installations require appropriately IP-rated equipment, suitable RCD protection and compliance with the applicable electrical zones and UAE regulations.

A qualified electrician should inspect terminal tightness and earth continuity, then carry out the tests required for the circuit, including polarity, insulation resistance, protective-conductor continuity and operation of the relevant protective devices. The switch and LED indication should also be functionally checked before the outlet is handed over for use.

Switch off the circuit before cleaning and use a soft, dry or slightly damp cloth. Do not apply abrasive pads, solvents, acidic cleaners or excessive moisture, as these may damage the antique gold finish or enter the mechanism. Periodic inspection by a qualified electrician is recommended if the socket becomes loose, discoloured, hot, noisy or intermittent.

Verify the model number AM23886-AG, 13A and 250V AC ratings, double-pole switching requirement, LED feature, antique gold finish, 1-gang configuration, flush-box dimensions and compatibility with the project's approved ABB Millenium accessories. For construction procurement, compare the item against the consultant-approved material submittal and electrical drawings.