ABB Millenium 13A Double Pole Switched Socket with LED Black Glass AM23886-BG

This socket is rated at 13A and 250V AC and uses a BS 13A socket-outlet configuration. It features double-pole switching, LED status indication, secure fixed-wiring terminals and flush mounting. Its listed dimensions are approximately 86 x 86 mm with a depth of 35 mm; installers should confirm the required back-box depth before installation.

Yes. Its 250V AC rating and BS 13A outlet format are suitable for the 230V, 50Hz electrical supply commonly used in the UAE. Final selection and installation must comply with the applicable requirements of the relevant UAE electricity authority, project specifications and current wiring regulations.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than a single-pole switch, although it does not replace circuit isolation at the distribution board before electrical maintenance.

The integrated LED provides a visible indication of the socket or connected-circuit status, depending on the specified wiring arrangement. It is particularly useful in residential, hotel, office and commercial installations where users need to identify the operating status quickly.

It is suitable for compatible BS-plug appliances that remain within the socket's 13A rating and the capacity of the final circuit. Typical applications include televisions, computers, lamps, chargers and selected household or office equipment. High-load equipment must be checked against its nameplate current, manufacturer instructions and circuit design before connection.

Yes. The socket is suitable for premium residential developments, offices, hotels, retail interiors and other UAE construction or refurbishment projects requiring concealed wiring and a decorative black glass finish. Contractors should coordinate the socket, matching frame, back box, cable size and circuit protection with the approved electrical drawings and material submittals.

Installation should be completed by a qualified electrician. The supply must first be safely isolated and verified as dead. A compatible flush back box is fitted level, the live, neutral and earth conductors are identified and terminated at the marked terminals, and all connections are tightened to the manufacturer's requirements. The mechanism and matching frame are then secured without trapping cables, followed by electrical testing before energisation.

A compatible concealed back box that accommodates the approximately 86 x 86 mm faceplate and the socket's listed depth is required. Additional space may be needed for cable bends and terminal clearance. Compatibility should be confirmed against ABB Millenium installation information, especially when using non-ABB back boxes or replacing an existing accessory.

Yes. The protective earth conductor must be correctly connected wherever required by the socket design and installation system. Earth continuity, polarity, insulation resistance and protective-device operation should be tested by a competent electrician in accordance with the project requirements and applicable UAE regulations.

It should only be installed where the environmental conditions and required ingress protection are suitable. The supplied information does not state an outdoor or wet-area IP rating, so it should not be assumed suitable for direct exposure to water, dust, humidity or weather. Installations in kitchens, bathrooms, balconies or outdoor locations require appropriate zoning, protection and authority-compliant accessories.

Circuit protection must be selected according to the cable size, circuit arrangement, prospective fault current, load and applicable authority requirements. Suitable overcurrent protection and residual-current protection may be required. The socket's 13A rating does not by itself determine the distribution-board protective-device rating, so the complete circuit must be designed and verified by a qualified electrical professional.

Switch off the circuit before cleaning and use a soft, dry or slightly damp microfiber cloth. Avoid abrasive pads, aggressive chemicals and excessive moisture around the switch, LED and socket apertures. Periodic inspection should check for cracking, discoloration, loose mounting, heat marks or unusual operation; any defect should be assessed by a qualified electrician.

It may be suitable where the existing installation uses a compatible BS 13A format, flush back box and wiring arrangement. Before replacement, verify the box dimensions and depth, conductor condition, earthing, circuit protection, frame compatibility and available terminal space. Do not rely only on the visible faceplate size when confirming compatibility.