ABB Millenium 13A Double Pole Switched Socket with LED Dune Sand AM23886-DU

This switched socket has a rated current of 13A, a rated voltage of 250V AC and a BS 13A socket outlet configuration. It measures approximately 35 x 86 x 86 mm and is intended for flush mounting. The unit includes secure terminals for fixed wiring, double-pole isolation and an integrated LED indicator.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than single-pole switching, subject to correct wiring and circuit design. The protective earth conductor remains permanently connected and must never be switched.

The integrated LED provides a visible indication of the socket or connected-circuit operating status. This helps users identify whether power has been switched on, which is useful in homes, offices, hotel rooms, workshops and other locations where quick status confirmation is required.

The socket is suitable for compatible BS 13A plugs and loads that remain within the outlet rating and the capacity of the final circuit. Typical applications include household appliances, office equipment, televisions, chargers and selected light-duty equipment. High-load or continuously operated appliances must be checked against their nameplate current, plug rating, circuit protection and manufacturer instructions before connection.

Yes, its BS 13A outlet format is widely used in UAE residential, commercial and hospitality developments. Suitability for a specific project must still be confirmed against the approved electrical drawings, project specifications, applicable UAE electrical regulations and the requirements of the relevant local authority, such as DEWA or the applicable Abu Dhabi, Sharjah or other emirate utility.

The socket is designed for flush installation, with the fixed wiring and mounting box concealed behind the finished wall. A qualified electrician should isolate and verify the circuit as de-energised, confirm that the back box and cable arrangement provide adequate space, terminate live, neutral and earth conductors at the marked terminals, tighten connections to the manufacturer's requirements, secure the unit level and complete electrical safety testing before energising it.

Contractors should verify the approved socket schedule, back-box compatibility, mounting depth, cable size, conductor condition, circuit rating, protective device and earthing continuity. They should also coordinate the 86 x 86 mm faceplate position with wall finishes, joinery, tiling and furniture. The approximately 35 mm product depth should be considered alongside terminal and cable-bending space rather than used as the sole basis for choosing a back box.

Yes, it can be incorporated into concrete, masonry or drywall construction when a compatible concealed mounting box and suitable fixing method are provided. For concrete and blockwork, conduits and boxes should be coordinated before plastering or finishing. For drywall, use a secure partition box or support system that prevents movement when plugs are inserted and removed.

The supplied information identifies it as a flush-mounted indoor socket and does not state a weatherproof or ingress-protection rating. Installation in wet, damp, outdoor or splash-prone locations requires an enclosure and accessory specifically rated for those conditions, together with appropriate RCD protection, zoning and installation practices required by local regulations. A project electrical consultant or licensed electrician should confirm suitability.

The Dune Sand colour offers a warm, neutral appearance that can complement beige stone, timber, textured paint and other finishes commonly used in UAE villas, apartments, hotels and commercial interiors. Contractors should confirm the finish against project samples because screen colours, lighting conditions and surrounding materials can affect its appearance.

After installation, the electrician should complete the tests required by the project and relevant local regulations. These commonly include protective-conductor continuity, insulation resistance, polarity, correct switching of live and neutral, earth-fault protection and functional checks of the socket and LED. Test results should be documented where required for inspection, commissioning and handover.

It may replace a compatible flush-mounted BS 13A socket if the mounting box, dimensions, wiring, earthing and circuit protection are suitable. The installer should not assume direct compatibility based only on the face size; the available box depth, fixing centres, cable condition and terminal space must be checked. Replacement work should be performed by a qualified electrician with the circuit safely isolated.

Switch off or isolate the circuit before inspection or maintenance. Clean the faceplate with a soft, dry or lightly damp cloth and avoid abrasive pads, solvents or spraying cleaner into the socket. Arrange professional inspection if there is overheating, discoloration, buzzing, a loose switch, damaged contacts, intermittent LED operation or difficulty retaining a plug.