ABB Millenium 13A Double Pole Switched Socket with LED Silk Black AM23886-SB

Key specifications include a 13A rated current, 250V AC rated voltage, BS 13A socket configuration, double-pole switching, integrated LED indication and flush-mounted installation. The listed overall dimensions are approximately 35 x 86 x 86 mm. The product is supplied in a Silk Black finish and uses secure terminals for fixed-wiring connections.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than a single-pole switch, which normally disconnects only the live conductor. The protective earth remains permanently connected and must never be switched.

Yes. Its 250V AC rating and BS 13A socket format are compatible with the nominal 230V, 50Hz supply and Type G plugs commonly used in the UAE. Final selection and installation should comply with the applicable UAE electrical regulations, project specifications and local authority requirements, such as those issued by DEWA or the relevant emirate's utility.

The integrated LED provides a clear visual indication of the switch or connected-circuit status, making it easier to confirm whether the outlet is energised according to its wiring configuration. This feature is useful in homes, offices, hotel rooms and commercial fit-outs where quick status identification is required.

The socket is intended for compatible BS 13A plug-connected equipment within the circuit and outlet ratings. Typical applications include computers, televisions, chargers, lamps and suitable household or office appliances. The connected load must not exceed 13A, and high-demand equipment should be checked against its nameplate current and the circuit design before use.

Suitability depends on the equipment's rated current, starting current and manufacturer instructions. Many air conditioners, water heaters and other fixed high-load appliances require a dedicated circuit and a suitably rated double-pole isolator rather than a standard 13A plug socket. A qualified electrician or project engineer should verify the load, protective device, cable size and isolation requirements.

The unit is designed for flush mounting, with permanent wiring and terminals concealed behind the finished wall surface. Installation generally involves isolating and proving the circuit dead, preparing a compatible back box, terminating live, neutral and earth conductors at the identified terminals, securing the mechanism and frame, and completing electrical safety tests before energisation. Installation must be carried out by a qualified electrician in accordance with the wiring diagram and applicable UAE regulations.

Use a compatible 1-gang flush back box that accommodates the approximately 86 x 86 mm face dimensions and the listed 35 mm product depth, while also allowing sufficient room for cable bends and safe terminal clearances. The installer should confirm ABB frame and back-box compatibility before wall finishing. For blockwork, drywall or other construction systems, the box must be rigidly fixed, level and flush with the finished surface.

Cable conductor size and protective-device rating must be selected from the circuit design, installation method, ambient temperature, grouping, voltage drop and fault protection requirements. The socket's 13A rating does not by itself determine the cable or breaker size. UAE projects should follow approved drawings, applicable authority rules and recognised wiring practices, with final verification by a qualified electrical professional.

Yes. Its concealed wiring, 1-gang layout, double-pole control and coordinated Silk Black finish make it suitable for villas, apartments, offices, hotels, retail spaces and premium interior fit-outs. Contractors should verify the approved material schedule, finish sample, back-box dimensions, circuit schedule and required quantities before procurement.

It should not be assumed suitable for exposed outdoor, wash-down or wet-area installation because an ingress-protection rating is not stated in the supplied specifications. For balconies, gardens, bathrooms or dusty construction environments, use an appropriately IP-rated enclosure or a purpose-designed weatherproof socket, subject to location-zone restrictions and local electrical requirements.

Yes. The specified BS 13A socket outlet is intended for the Type G three-pin plug format widely used in the UAE. Do not force incompatible plugs into the outlet or rely on loose travel adaptors for permanent use. Imported equipment should have a correctly rated, compliant plug or an approved connection arrangement.

Switch off and isolate the electrical supply before maintenance. Clean the visible surface with a soft, dry or slightly damp cloth, then wipe it dry. Avoid abrasive pads, solvents, strong chemicals and excessive water, as these may damage the Silk Black finish or enter the mechanism. Replace the unit if it becomes cracked, loose, discoloured by heat or unreliable in operation.

A qualified electrician should check terminal tightness, conductor identification, earth continuity, polarity, insulation resistance, protective-device coordination and secure mechanical fixing. The double-pole switch, LED indicator and outlet operation should also be functionally tested. Test results should be recorded where required by the project's inspection and commissioning procedures.