ABB Millenium 13A Single Pole Switched Socket with LED Dune Sand AM23486-DU

The AM23486-DU combines a UAE-relevant BS 13A outlet format, 13A and 250V AC electrical ratings, local single-pole control, LED status indication and concealed flush mounting. Its Dune Sand finish also supports coordinated architectural interiors, making it a practical option for contractors, consultants and property owners specifying indoor wiring accessories.

Switch off the relevant circuit before inspection or cleaning. Wipe the front surface with a soft, dry or slightly damp cloth and avoid abrasive cleaners, solvents and direct water spray. Stop using the outlet and arrange professional inspection if there is cracking, discoloration, overheating, loose plug retention, buzzing or an intermittent LED.

Before handover, the electrician should inspect conductor terminations and test protective-conductor continuity, insulation resistance, polarity, fault-loop conditions and operation of applicable RCD or RCBO protection. The switch, LED indicator and socket function should also be verified under safe test conditions, with results recorded where required by the project or local authority.

It may replace a compatible 1-gang BS 13A socket if the wall box, dimensions, fixing arrangement, wiring condition and circuit protection are suitable. The ABB Millenium model measures approximately 86 x 86 mm at the face and has a listed depth of 35 mm. A qualified electrician should inspect the existing installation because direct mechanical compatibility cannot be assumed.

The product information identifies the socket mechanism and notes that a matching frame completes the installed finish, but package contents can vary by supply configuration. Check the FEPY product listing or order confirmation to determine whether the frame, back box or other mounting components must be purchased separately.

The Dune Sand colour provides a warm, neutral appearance that can coordinate with beige stone, timber, cream walls and contemporary décor commonly used in UAE villas, apartments, hotels and offices. For multi-room projects, confirm the finish against a physical sample and use matching ABB Millenium frames and accessories for a consistent appearance.

This model should be treated as an indoor flush-mounted socket unless ABB documentation confirms a suitable ingress-protection rating for the proposed location. Kitchens, bathrooms, utility spaces and outdoor areas can involve moisture, splash or zoning requirements, so a suitably rated accessory and compliant installation position must be selected. It should not be exposed directly to rain, water jets, heavy dust or condensation without appropriate protection.

Protection must be selected according to the cable size, installation method, expected load, fault level and applicable regulations. Depending on the project, the socket circuit may require an MCB or RCBO and additional residual-current protection. A qualified electrical designer or electrician should determine the correct arrangement rather than selecting protection solely from the socket's 13A rating.

The ABB Millenium AM23486-DU is a 1-gang, flush-mounted BS 13A socket outlet with single-pole switching and an integrated LED status indicator. It is rated at 13A and 250V AC and features a Dune Sand finish for coordinated residential, commercial and hospitality interiors.

A compatible concealed back box with sufficient internal depth, fixing centres and cable space is required. The socket is listed at approximately 35 mm deep, but additional space may be needed for conductors and safe bend radii. Confirm compatibility with the ABB Millenium mounting system and the selected wall construction before installation.

Installation involves isolating and proving the circuit dead, confirming the conductors and back box, terminating live, neutral and earth at the correctly marked terminals, securing the mechanism, fitting the compatible frame or cover and completing electrical tests. Installation should only be performed by a qualified electrician using ABB's current instructions and the applicable UAE wiring requirements.

Yes. It is suitable for specified electrical fit-out work in villas, apartments, offices, retail premises, hotels and other indoor buildings. Contractors should verify the approved material schedule, finish, back-box compatibility, circuit rating and local authority requirements before ordering quantities for a project.

It can supply compatible appliances fitted with a BS 13A or Type G plug, provided the appliance load and circuit design remain within the socket's 13A rating. Typical applications may include computers, televisions, small kitchen appliances and general office equipment. High-load or fixed equipment should be checked against its nameplate current, manufacturer instructions and the circuit design before connection.

The integrated LED provides a visible indication of the switch or connected-circuit status, depending on the manufacturer-specified terminal arrangement. This is useful in homes, offices, hotels and commercial spaces where users need to identify the socket's operating condition quickly. The electrician should follow ABB's wiring instructions to obtain the intended indication mode.