ABB Millenium 13A Single Pole Switched Socket with LED Mocha Brown AM23486-MO

Key specifications include a 13A rated current, 250V AC rated voltage, BS 13A socket outlet configuration, single-pole switching, LED status indication, flush-mounted installation, and overall dimensions of approximately 35 x 86 x 86 mm. The product is supplied in a mocha brown finish and uses secure terminals for fixed cable connections.

Yes. Its BS 13A outlet format is suitable for the Type G plug system commonly used across the UAE. It can be specified for villas, apartments, offices, hotels, retail spaces, and other projects where a 250V AC, 13A switched socket is required. Installation must comply with the approved project drawings, applicable UAE electrical regulations, local authority requirements, and the instructions of the manufacturer.

Single-pole switching means that the socket switch disconnects the live conductor while the neutral conductor remains connected. This provides convenient local control of the connected appliance. The live, neutral, and earth conductors must be identified and terminated correctly by a qualified electrician.

The integrated LED provides a visible indication of the socket's operating or switched status, depending on the product wiring configuration. This helps users identify whether power has been enabled at the outlet, particularly in low-light rooms, hotel interiors, offices, and residential spaces.

The socket is intended for compatible BS 13A plug-connected appliances operating within the outlet's 13A, 250V AC rating. Typical applications may include televisions, computers, lamps, chargers, small kitchen appliances, and general office equipment. The actual connected load must not exceed the socket rating or the capacity of the protected final circuit.

Only if the equipment uses a compatible BS 13A plug and its current demand remains within the socket and circuit ratings. Many air conditioners, water heaters, cookers, and other high-load appliances require dedicated circuits, isolators, or connection units rather than a standard 13A socket. The equipment data plate, approved electrical design, and local UAE requirements should be checked before installation.

The unit is designed for flush mounting in a compatible concealed wall box. The electrical supply must first be isolated and verified as dead. A qualified electrician should connect the live, neutral, and earth conductors to the identified terminals, tighten each connection to the manufacturer's requirements, fit the socket and matching frame squarely to the wall box, and then complete the required continuity, polarity, insulation, and functional checks before energising the circuit.

The socket measures approximately 35 x 86 x 86 mm, but the selected wall box must provide adequate internal depth for the mechanism, cable bend radius, terminals, and earth continuity arrangements. Before blockwork cutting or drywall closure, the contractor should confirm compatibility with the ABB Millenium mounting system, frame, back box, wiring method, and specified wall finish.

Yes, the correct matching frame completes the installed appearance and helps ensure proper alignment with the ABB Millenium system. Confirm whether the required frame and back box are included or must be ordered separately, and use compatible ABB Millenium components to achieve the intended fit and mocha brown finish.

Yes, provided a compatible flush box and the correct fixing method are used. For concrete or blockwork, the box should be positioned before final plastering and kept level with the finished surface. For gypsum partitions, use a suitable drywall box fixed securely to the partition system. Contractors should protect the mechanism from dust, paint, plaster, and moisture during construction.

Yes. The mocha brown finish is well suited to hospitality, premium residential, office, retail, and interior fit-out projects using warm timber, stone, bronze, or earth-tone finishes. For a consistent result, confirm the approved sample, frame selection, accessory schedule, and colour coordination before placing a project-wide order.

The supplied information does not state an outdoor or ingress-protection rating. It should therefore be treated as an indoor accessory for dry locations unless ABB documentation confirms otherwise. Outdoor areas, bathrooms, utility zones, and locations exposed to water, condensation, or dust require appropriately rated enclosures or accessories selected according to the relevant zone and UAE project requirements.

The socket must be connected to a correctly designed and protected final circuit. Cable size, protective device rating, earthing, fault protection, and any required residual-current protection must be determined from the approved electrical design, installation conditions, and applicable regulations. A qualified electrician should verify these requirements rather than selecting protection solely from the socket's 13A rating.

The electrician should check terminal tightness, protective-conductor continuity, polarity, insulation resistance, secure fixing, switch operation, LED indication, and socket functionality. The faceplate should sit level without gaps or damage, and the completed circuit should be labelled and documented in accordance with the project's testing and commissioning requirements.