ABB Millenium 13A Universal Switched Socket Black Glass AM29486-BG

It may be used as a replacement if the existing circuit, back box, fixing arrangement, wiring condition, earthing and wall opening are compatible. The 86 x 86 mm face dimensions alone do not guarantee direct interchangeability. A qualified electrician should inspect the installation, confirm local compliance and complete polarity, earth-continuity and functional tests after replacement.

The socket combines a 13A switched outlet, concealed wiring and a coordinated black glass appearance suited to modern UAE villas, hotels, offices and high-end fit-outs. Its ABB Millenium system compatibility helps designers maintain a consistent accessory style across a project, while the flush-mounted format supports clean wall finishes. Final selection should remain subject to consultant approval and project compliance requirements.

Isolate the outlet before cleaning, then wipe the surface gently with a soft, dry or slightly damp non-abrasive cloth. Do not spray cleaner directly onto the socket or use abrasive pads, solvents or harsh chemicals, as these may damage the glass finish or enter the electrical mechanism. Periodic inspection for looseness, overheating, cracking or discoloration should be performed by qualified personnel.

Use in kitchens or similar indoor areas depends on positioning and compliance with the project's electrical requirements. The supplied information does not state an IP rating, so it should not be assumed suitable for wet zones, exposed outdoor locations or areas subject to water spray, condensation or heavy dust. Such locations require appropriately rated weatherproof or moisture-resistant accessories.

The integrated switch provides convenient local control of power at the outlet. This allows users to disconnect the connected appliance without removing its plug, while also giving a clear and practical point of control. The upstream circuit must still be isolated at the distribution board before electrical installation, inspection or maintenance.

It may supply compatible indoor appliances and electronic equipment provided the plug arrangement is accepted, the equipment is rated for the UAE supply, and the total current remains within 13A. High-load equipment should only be connected where the circuit design and manufacturer instructions permit it. Fixed heavy appliances may require a dedicated circuit, isolator or connection unit rather than a general-purpose socket.

Yes, it may be incorporated into concrete, masonry or drywall construction when a compatible concealed box and suitable fixing method are specified. For blockwork or concrete, the box should be positioned before final plastering and protected from debris. For drywall, it must be firmly supported and aligned with the finished board surface. Installation depth and cable routing should follow the coordinated MEP drawings.

The product has an 86 x 86 mm face size and an approximate overall depth of 35 mm, but mounting-box dimensions, fixing centres and usable internal depth must be checked before installation. Allow additional space for cable bends and terminal clearance, and use a compatible ABB Millenium frame and mounting arrangement to achieve a secure, level finish.

Contractors should verify the circuit voltage and protection, conductor size, earthing continuity, polarity, mounting-box dimensions, available installation depth and compatibility with the selected ABB Millenium frame. They should also check that the planned connected load does not exceed 13A and that the product is approved for the project's specified socket standard and local authority requirements.

The socket is designed for flush installation, with the wiring and mounting box concealed behind the finished wall. Installation should include isolating and verifying the circuit is de-energised, confirming box compatibility and depth, terminating line, neutral and earth conductors at the marked terminals, securing the mechanism, fitting the compatible ABB Millenium frame and testing the completed circuit. A licensed electrician should carry out all work in accordance with the approved drawings and local regulations.

This socket is suitable for indoor locations such as villas, apartments, offices, hotel rooms, reception areas, meeting rooms and premium retail interiors. Its concealed mounting and black glass appearance make it especially relevant to projects requiring coordinated, contemporary electrical accessories. It should only serve appliances and equipment within the socket and circuit ratings.

It can be used in compatible UAE projects where the approved electrical design permits a 13A, 250V AC universal socket. UAE installations commonly use BS 1363 Type G plugs and sockets, so the consultant, contractor or licensed electrician should confirm that this universal outlet is accepted by the relevant local authority, project specification and applicable UAE conformity requirements before installation.

Key specifications include a 13A rated current, 250V AC rated voltage, universal socket-outlet configuration, 1-gang layout and flush-mounted installation. Its overall dimensions are approximately 35 x 86 x 86 mm. The socket also features local switched control and secure terminals for permanent cable connections.

The ABB Millenium AM29486-BG is a 1-gang, flush-mounted universal socket outlet with an integrated switch and a premium black glass finish. It is rated at 13A and 250V AC and is designed for concealed fixed-wiring installations in residential, commercial and hospitality interiors.