ABB Millenium 13A Universal Switched Socket Matt Gold AM29486-MG

Confirm the approved electrical schedule, required quantity, 1-gang configuration, 13A and 250V AC ratings, universal outlet acceptance, matt gold finish, compatible ABB Millenium frames, back-box dimensions, wall build-up, and consultant specifications. For large UAE construction projects, it is also advisable to prepare a sample installation or mock-up before bulk procurement and final fit-out.

Isolate the circuit before inspection or cleaning. Wipe the face gently with a soft, dry or lightly damp cloth and avoid solvents, abrasive pads, acidic cleaners, and excessive moisture that could affect the matt gold finish. In dusty environments, remove surface dust carefully. Arrange professional inspection if the socket becomes loose, discoloured, unusually warm, noisy, cracked, or intermittent.

The supplied information identifies it as a flush-mounted socket but does not state an outdoor or ingress-protection rating. It should therefore be treated as an indoor product unless ABB documentation confirms otherwise. Outdoor, bathroom, wash-area, or other damp-location installations require an appropriately rated enclosure or accessory, suitable circuit protection, and compliance with prescribed electrical zones.

Yes. The matt gold finish is well suited to villas, apartments, hotels, executive offices, reception areas, and other premium UAE interiors where electrical accessories form part of the design scheme. For a consistent appearance, use compatible ABB Millenium frames and accessories and protect the visible surface from cement, paint, grout, dust, abrasive cleaners, and impact during construction.

Protection depends on the final-circuit design, connected load, cable size, installation method, and applicable UAE authority requirements. The circuit should include correctly rated overcurrent protection, reliable earthing, and residual-current protection where required. A qualified electrician must verify polarity, earth continuity, insulation resistance, protective-device coordination, and operational performance before energising the outlet.

The integrated switch allows convenient local control of power at the outlet. It should not be treated as a substitute for upstream circuit isolation, lockout procedures, or a dedicated isolator where one is required by the equipment manufacturer or electrical design. The circuit must be safely isolated at the distribution board before installation or maintenance.

Early coordination helps ensure that the electrical back box, conduit, cable route, wall finish, and ABB Millenium frame align correctly. Contractors should verify the finished floor level, outlet height, furniture layout, tile joints, wall cladding thickness, and adjacent accessories before first-fix work. This reduces misalignment, recessed faceplates, damaged finishes, and rework during final installation.

Yes, it may be used in suitable blockwork, gypsum-board partitions, or fitted joinery when the correct flush box, supports, and installation method are provided. In block walls, coordinate the box position before plastering or tiling. In drywall, use a secure cavity box or approved support. For joinery, maintain adequate enclosure depth, cable protection, ventilation, and access in accordance with the electrical design.

The socket has stated overall dimensions of 35 x 86 x 86 mm and is intended for flush mounting. The installer should select a compatible back box that provides sufficient internal depth for the mechanism, cable bend radius, terminals, and safe conductor arrangement without compression. Confirm the exact ABB Millenium frame and back-box compatibility before wall chasing, drywall closure, tiling, or final fit-out.

The unit is installed as a flush-mounted outlet with fixed wiring concealed behind the finished wall. Installation generally involves isolating and verifying the circuit as de-energised, preparing a compatible back box, terminating live, neutral, and earth conductors at the marked terminals, securing the mechanism, fitting the matching ABB Millenium frame, and completing electrical safety tests. Installation must be performed by a qualified electrician in accordance with the wiring diagram and local regulations.

A universal outlet is designed to accommodate multiple compatible plug formats, but it should not be assumed to accept every international plug or provide identical engagement for all plug types. Buyers should confirm the intended plug configuration and project requirements before ordering. For UAE projects where BS 1363-style plugs and shutter requirements are specified, compatibility and approval should be checked with the consultant or electrical contractor.

The socket is intended for compatible appliances and equipment that operate within the outlet's 13A and 250V AC ratings and the capacity of the final circuit. Typical applications may include televisions, computers, chargers, lamps, and suitable household or office equipment. High-load appliances should only be connected after an electrician verifies their current demand, circuit design, protective device, cable capacity, and manufacturer instructions.

Its 250V AC rating is compatible with the nominal 230V, 50Hz electrical supply commonly used in the UAE. However, the complete installation must comply with the applicable requirements of the relevant UAE authority, such as DEWA, ADDC, SEWA, or the authority having jurisdiction. A licensed electrician should confirm circuit protection, earthing, wiring size, plug compatibility, and project approval requirements.

The socket has a rated current of 13A, a rated voltage of 250V AC, a universal socket-outlet configuration, and a 1-gang format. Its stated dimensions are 35 x 86 x 86 mm, with an 86 mm face width. It is designed for concealed, flush-mounted installation and local power control through the integrated switch.