ABB Millenium 13A Universal Switched Socket Stainless Steel AM29486-ST

The socket has a rated current of 13A, a rated voltage of 250V AC, a 1-gang configuration and overall dimensions of approximately 35 x 86 x 86 mm. It uses secure terminals for fixed wiring, includes local switched control and is intended for flush mounting with compatible ABB Millenium frames and installation accessories.

The universal outlet configuration is intended to accept multiple commonly used plug formats. Actual compatibility should be checked against the connected plug, pin arrangement and manufacturer documentation before use. For permanent UAE projects where BS 1363 socket outlets are specified, the consultant or electrical engineer should confirm that a universal outlet is permitted.

Yes, its 250V AC and 13A ratings align with the nominal 230V, 50Hz electrical supply commonly used in the UAE. Installation must still comply with the approved project specification, applicable UAE electrical regulations and the requirements of the relevant local authority, such as DEWA, TAQA Distribution or SEWA.

No. The universal socket only provides physical plug connectivity and does not convert voltage, frequency or current. Before connecting an imported appliance, confirm that its nameplate supports the UAE supply, normally 230V at 50Hz. A suitable voltage converter or transformer may be required for equipment designed exclusively for another voltage.

It can serve compatible appliances and equipment whose operating current and electrical load remain within the 13A, 250V AC socket rating and the capacity of the final circuit. Typical applications may include lamps, televisions, computers and small appliances. High-load equipment must be checked by an electrician against its nameplate rating, circuit design and manufacturer instructions.

The socket is designed for flush installation, with the fixed wiring and mounting box concealed behind the finished wall surface. A qualified electrician should isolate and verify the circuit, confirm the compatible back box and frame, terminate line, neutral and earth conductors at the identified terminals, secure the mechanism without trapping cables, fit the matching frame and complete the required electrical tests before energising.

Use a flush back box with adequate internal depth and fixing points for the approximately 35 x 86 x 86 mm mechanism, together with the compatible ABB Millenium frame or accessory specified for the installation. Back-box compatibility, cable space and wall-finish depth should be confirmed before cutting blockwork, gypsum board, joinery or decorative wall panels.

Yes. It is suitable for new-build fit-outs and refurbishment projects where concealed wiring and a flush-mounted finish are required. During construction, coordinate the outlet position, back-box depth, conduit route, final wall thickness and ABB Millenium frame selection before plastering, tiling or installing wall panels.

A reliable protective earth connection is essential for electrical safety, particularly when supplying Class I appliances with exposed conductive parts. The electrician should terminate the earth conductor correctly, maintain earth continuity and perform the prescribed continuity, insulation-resistance, polarity and protective-device tests before the socket is placed into service.

Confirm model AM29486-ST, the 13A and 250V AC ratings, 1-gang arrangement, universal outlet requirement, stainless-steel finish, flush-mounting dimensions and compatibility with the chosen ABB Millenium frame and back box. Also verify that the socket type is accepted by the project consultant and relevant UAE authority before procurement.

Isolate the electrical supply before maintenance and wipe the faceplate with a soft, dry or slightly damp cloth. Do not spray cleaner directly onto the socket or use abrasive pads, strong solvents, acidic chemicals or excessive water. Periodic inspection by a qualified electrician is recommended if there are signs of overheating, discoloration, loose operation, cracking or damaged terminals.

Yes, it is suited to interior applications in villas, apartments, hotel rooms, offices, reception areas and other commercial fit-outs where a universal outlet and coordinated stainless-steel finish are specified. For large projects, confirm consultant approval, plug-format policy, authority requirements and compatibility with the selected ABB Millenium wiring-accessory schedule.

The stainless-steel appearance is intended as a decorative interior finish and does not by itself confirm weatherproofing or water resistance. For kitchens, bathrooms, wash areas, balconies or outdoor locations, verify the required IP rating, installation zone, RCD protection and local regulations. Use a suitably rated weatherproof accessory where exposure to water, dust or humidity is expected.

The integrated switch provides convenient local control of the socket outlet, allowing the connected load to be switched without removing the plug. It must not be treated as the sole means of safe isolation during installation or maintenance; the circuit should be isolated at the distribution board and verified dead by a qualified electrician.