ABB Millenium 13A Universal Switched Socket White Glass AM29486-WG

The socket has a rated current of 13A, a rated voltage of 250V AC, a universal outlet configuration and a flush-mounted installation design. Its stated dimensions are 35 x 86 x 86 mm. It includes secure cable terminals and is designed to coordinate with compatible ABB Millenium frames and accessories.

Its 250V AC and 13A rating aligns with the nominal low-voltage supply commonly used in UAE buildings. However, the universal outlet format should be checked against the project specification, consultant requirements and the regulations of the relevant UAE authority. Type G outlets conforming to BS 1363 are commonly specified in the UAE, so approval of the universal socket configuration should be confirmed before installation.

The outlet may be used for compatible portable appliances and electronic equipment whose voltage, plug type and current demand are within the socket and circuit ratings. The total connected load must not exceed 13A at 250V AC. High-load equipment such as water heaters, cookers, large air conditioners or fixed machinery should use the dedicated connection method and circuit protection specified by the manufacturer and electrical design.

The switch provides convenient local on-and-off control at the outlet. It should not be treated as the sole means of safe electrical isolation during installation, maintenance or testing. The circuit must be isolated at the distribution board, locked out where required and verified dead using suitable test equipment.

Installation involves isolating and verifying the circuit, checking the flush box and cable condition, terminating the conductors at the marked terminals, securing the mechanism without trapping wires, fitting the compatible ABB Millenium frame and testing the completed circuit. Installation should be completed by a qualified electrician in accordance with the approved drawings, manufacturer instructions and applicable UAE electrical regulations.

A suitable concealed wall box with adequate depth, correct fixing centres and enough space for safe cable bending is required. The mechanism must be used with compatible ABB Millenium frames and accessories. Because the product measures approximately 35 x 86 x 86 mm, the installer should verify box depth, wall build-up and frame compatibility before closing plasterboard, blockwork finishes or decorative cladding.

Cable size and protective-device selection depend on the circuit arrangement, installation method, ambient temperature, grouping, cable length, voltage drop and project requirements. They cannot be selected from the socket rating alone. A qualified electrical designer or electrician should size the conductors and MCB or RCBO in accordance with the applicable wiring regulations, authority requirements and approved load schedule.

A qualified electrician should inspect conductor identification and terminal tightness, verify protective-conductor continuity, insulation resistance, polarity, earth-fault protection and operation of the integrated switch. Where applicable, RCD or RCBO trip performance and circuit impedance should also be tested. Results should be documented as part of the project's electrical inspection and commissioning records.

The socket is suitable for specified indoor power points in residential, hospitality, office and commercial fit-out projects. Typical locations include bedrooms, living areas, workspaces and selected general-purpose equipment points. Final placement and outlet type must follow the electrical layout, load schedule, interior finish plan and applicable UAE regulations.

Correct termination helps maintain a low-resistance electrical connection and reduces the risk of arcing, overheating and premature failure. Conductors should be prepared correctly, inserted fully and tightened to the manufacturer's specified torque where provided. Loose connections must not be corrected while the circuit is energised.

Switch off the circuit before maintenance and clean the glass surface with a soft, slightly damp cloth. Do not use abrasive pads, aggressive chemicals or excessive water. Periodically inspect for cracks, discoloration, loose mounting, heat marks, unusual smells or intermittent operation. Any damaged or overheating socket should be isolated and examined by a qualified electrician.

Yes. The white glass face provides a clean, contemporary appearance suitable for villas, apartments, hotels, offices and premium commercial interiors. It can coordinate with light-coloured walls, stone finishes and modern joinery, while the flush-mounted design keeps cables and terminations concealed.

This product should be treated as an indoor flush-mounted socket unless ABB documentation for the exact assembly confirms a suitable ingress-protection rating. In kitchens, bathrooms, utility rooms, balconies or outdoor locations, socket positioning, wet-area zones, IP protection and RCD requirements must be assessed. For exposed or damp environments, use an appropriately rated weatherproof outlet.

The ABB Millenium AM29486-WG is a 1-gang, flush-mounted universal socket outlet with an integrated switch and a white glass decorative finish. Rated at 13A and 250V AC, it provides local control of a connected appliance while keeping the fixed wiring concealed behind the finished wall.