ABB Millenium 15A Double Pole Single Switched Socket Black Glass AM20986-BG

Check the model number AM20986-BG, 15A current rating, 250V AC rating, 15A round-pin connector, double-pole switching, 1-gang configuration, black glass finish and flush-mounted dimensions of 35 x 86 x 86 mm. Compare these details with the approved material submittal, appliance plug and electrical drawings before procurement.

Yes, provided the electrical design specifies a 15A round-pin outlet and a compatible ABB Millenium flush-mounting arrangement. For new construction, coordinate the back box and conduit during first fix. For renovations, verify the existing box dimensions, wiring condition, earthing, circuit capacity and wall depth before replacing an outlet.

The socket must be connected to a circuit with correctly selected overcurrent protection, effective earthing and any RCD or RCBO protection required by the project design and applicable UAE regulations. Protective-device selection must consider the cable size, connected load, fault level and disconnection requirements rather than relying only on the socket's 15A rating.

Protect the face from cement slurry, paint, abrasive dust and impact during construction. After installation, isolate the supply if necessary and wipe the surface with a soft, lightly damp microfibre cloth. Do not use abrasive pads, aggressive solvents or excessive liquid around the switch and socket openings.

Use a compatible flush back box with sufficient internal depth for the 35 mm product depth, conductor bend radius and safe terminal clearance. The finished installation should use the matching ABB Millenium frame or associated components specified for this mechanism. Contractors should confirm box dimensions, frame compatibility and included parts before first-fix work.

An IP protection rating is not provided in the available product data, so it should not be treated as weatherproof or suitable for exposed outdoor, wash-down or wet-area installation. For balconies, gardens, plant rooms or other damp locations, select an outlet and enclosure with an IP rating appropriate to the environment and comply with local requirements for RCD protection and safe positioning.

Yes. The AM20986-BG is designed for flush mounting, allowing permanent wiring and the mounting box to remain concealed behind the finished wall. This makes it suitable for coordinated interior fit-outs, apartments, villas, hotels, offices and premium commercial spaces where a clean black glass appearance is required.

That depends on the connected load and the project's electrical design. A 15A outlet used for dedicated equipment may require its own appropriately sized circuit and protective device. The socket's 15A rating does not mean every existing circuit can safely supply 15A; cable capacity, installation method, ambient temperature, voltage drop and protective-device coordination must be assessed by the electrical designer or contractor.

Contractors should check the approved electrical drawings, load schedule, circuit protective device, cable size, earthing arrangement, back-box depth, plug format and accessibility requirements. Installation must follow ABB documentation, the project specification and applicable UAE electrical regulations, including requirements of the relevant local authority or utility such as DEWA, ADDC or the authority having jurisdiction.

Installation should be completed by a qualified electrician. Isolate and verify the circuit as de-energised, confirm that the back box and cable capacity are suitable, terminate live, neutral and protective earth conductors at the marked terminals, tighten connections to ABB's instructions and secure the mechanism level within the flush box. Fit the matching frame or cover, then perform continuity, polarity, insulation-resistance and functional tests before energising.

It is not a universal socket and should not be assumed to accept the common UAE 13A rectangular-pin plug based on BS 1363. The AM20986-BG is specified as a 15A round-pin socket, so buyers should verify plug compatibility and the electrical consultant's specification before ordering. Adaptors should not be used as a substitute for a correctly selected outlet.

This socket may be used with equipment fitted with a compatible 15A round-pin plug, subject to the appliance load, circuit design and project requirements. Potential applications include selected air-conditioning equipment, dedicated appliances, specialist equipment and installations where a 15A round-pin connection is specified. Confirm the appliance plug, voltage, current and manufacturer instructions before connection.

A double-pole switch disconnects both the live and neutral conductors at the same time. This provides more complete local isolation of a compatible appliance than single-pole switching. It does not replace circuit protection or formal safe-isolation procedures during electrical maintenance.

Key specifications include a 15A rated current, 250V AC rated voltage, double-pole switching, a 15A round-pin outlet and flush-mounted installation. The nominal product dimensions are 35 x 86 x 86 mm, with an 86 mm face width. Its terminals are designed for secure fixed-wiring connections when installed using the correct conductor size and tightening method.