ABB Millenium 45A Cooker Control Unit with 13A Switched Socket Silk Black AM118147-SB

Isolate the circuit before maintenance and wipe the surface with a soft, dry or slightly damp cloth. Do not use abrasive pads, strong solvents or excessive water, as these may damage the finish or enter the mechanism. Loose operation, heat marks, discolouration, buzzing or a burning smell requires immediate isolation and inspection by a qualified electrician.

The electrician should inspect conductor terminations and earthing, verify polarity and continuity, perform the required insulation and protective-device tests, and confirm correct operation of both switches and the socket outlet. The cooker isolation function should also be checked under safe conditions. Test results should be recorded as required by the project quality plan and local inspection procedure.

Contractors should confirm the model number, 45A rating, 250V AC supply, 2-gang arrangement, BS 13A switched socket, Silk Black finish and approximate 42 x 147 x 86 mm dimensions. They should also verify compatibility with the required ABB Millenium frame, mounting box, cooker circuit design, project-approved material list and the quantity needed for the construction schedule.

Yes, provided a compatible recessed box is securely installed and the finished opening supports the unit dimensions and frame system. In blockwork, conduit and box positions should be coordinated before plastering. In drywall, a suitable cavity box and proper support are required. For tiled kitchens, the cut-out should be completed accurately so the plate sits level and flush without stressing the mechanism.

It should be installed in an accessible position near the cooking appliance so it can provide convenient local isolation without being placed directly above a hot surface or where heat, steam, water or grease may cause deterioration. The exact location and mounting height should follow the approved electrical and kitchen layouts, appliance instructions, accessibility requirements and applicable local regulations.

The 250V AC rating and BS-style 13A switched socket make it relevant to many UAE residential, hospitality and commercial kitchen specifications. Its flush-mounted Silk Black design is suitable for contemporary interiors. Compatibility must still be confirmed against the project voltage, approved materials schedule, appliance load, mounting system and requirements of the relevant UAE authority or consultant.

No. The unit provides local switching and connection functions; it does not replace a correctly rated circuit breaker, RCBO or other required protective device in the distribution board. The circuit must include suitable overload, short-circuit and earth-fault protection as required by the electrical design and applicable UAE regulations.

Cable size and circuit protection cannot be determined from the switch rating alone. They depend on the appliance demand, installation method, conductor material, ambient temperature, grouping, cable length, voltage drop and local authority rules. UAE ambient conditions and concealed conduit installations may require derating, so the final cable and breaker selection must be calculated by the project electrical engineer or qualified electrician.

A qualified and locally authorised electrician should install it. High-current cooker circuits require correct cable selection, earthing, protective-device coordination, polarity checks, insulation-resistance testing and verification of terminal tightness. UAE projects must also follow the applicable local authority requirements, approved project specifications and the current wiring regulations adopted in the relevant emirate.

Installation requires a compatible recessed mounting box, correctly sized conductors and secure termination of the supply, load and protective-earth connections according to the product markings. The power must be isolated and proven dead before work begins. After termination, the mechanism and compatible ABB Millenium frame are fitted flush with the finished wall, followed by electrical inspection and functional testing.

They can generally be operated independently, but simultaneous use depends on the final circuit design and connected loads. The electrician must account for the cooker demand, socket load, protective device, cable size and distribution-board capacity. The 13A socket must never be treated as an additional 45A outlet.

The integrated BS 13A switched socket provides a separate outlet for a compatible portable kitchen appliance or accessory. Its load is independent of the 45A cooker-switch rating and must remain within the socket, plug, circuit and installation limits. High-load cooking equipment should not be connected to the 13A socket unless it is specifically designed for a standard BS plug connection.

It may be used as the local control and isolation point for a compatible electric cooker, hob or oven circuit, subject to the appliance load and the electrical design. The appliance nameplate rating, diversity assessment, cable capacity, circuit breaker and manufacturer instructions must all be checked by a qualified electrician before installation. A 45A switch should not be selected solely from the appliance type.

This unit has a documented rated current of 45A, a rated voltage of 250V AC, a BS 13A switched socket outlet and a cooker control switch. It is designed for flush mounting and measures approximately 42 x 147 x 86 mm. The product model is ABB AM118147-SB and the configuration is listed as 2 gang.