ABB Millenium 45A Cooker Control Unit with 13A Switched Socket Stainless Steel AM118147-ST

Key specifications include a 45A rated current, 250V AC rated voltage, integrated BS 13A switched socket outlet, two-gang configuration, flush-mounted installation and product dimensions of approximately 42 x 147 x 86 mm. The unit features terminals intended for secure fixed-wiring connections when installed correctly.

The 45A switch is intended for a compatible fixed cooking circuit serving equipment such as an electric cooker, oven or hob. Suitability must be confirmed from the appliance nameplate, connected load, supply arrangement and manufacturer instructions. The cooker load must not exceed the switch rating, and the circuit cable and protective device must be selected independently by a qualified electrician.

The BS 13A switched socket provides a convenient local outlet for a suitable portable kitchen appliance fitted with a compatible plug. It operates separately from the cooker control switch and must not be treated as an additional 45A outlet. Any connected appliance must remain within the socket rating and applicable circuit requirements.

Yes, it can be specified for suitable kitchens in villas, apartments, staff accommodation and certain commercial or hospitality developments where a 45A cooker control point with a 13A socket is required. The electrical consultant or contractor should verify the final circuit design, appliance load, installation environment and project specifications before approval.

The unit is designed for flush installation, with the wiring and mounting enclosure concealed behind the finished wall. Installation generally involves isolating the supply, verifying the correct back box and cable capacity, terminating the conductors at the marked terminals, securing the mechanism, fitting the compatible frame and completing electrical tests before energisation. It should be installed only by a qualified electrician.

Confirm the appliance load, supply voltage, circuit arrangement, cable conductor size, protective device rating, earthing provision, back-box dimensions and compatibility with the ABB Millenium mounting system. The electrician should also verify terminal capacity, cable routing, required installation depth and local project requirements. Never select a cooker switch solely from its 45A faceplate rating.

Fixed high-load cooking appliances commonly require a dedicated final circuit, but the exact arrangement depends on the connected load and approved electrical design. A qualified electrician or electrical engineer should determine the cable size, protective device, isolation method and permissible demand in accordance with the appliance instructions and applicable UAE authority requirements.

Cooker circuits can carry substantial current, so loose, undersized or incorrectly prepared connections may cause overheating, voltage drop, arcing or equipment failure. Conductors must be correctly sized, stripped, inserted and tightened using the manufacturer's specified method. The installer should inspect the terminals and complete continuity, insulation resistance, polarity and functional testing before handover.

Check the manufacturer, model number AM118147-ST, 45A cooker switch rating, 250V AC rating, BS 13A switched socket configuration, two-gang format, stainless steel finish and flush-mounting requirement against the project schedule. Contractors should also confirm compatibility with the specified ABB Millenium frame, back box, connected appliance and electrical drawings before procurement.

They may be operated independently where the installed circuit design permits, but the total arrangement must comply with the approved wiring design and manufacturer instructions. The 13A outlet must not be overloaded, and its presence does not increase the 45A rating of the cooker switch. Circuit verification should be completed by the project electrician.

The decorative stainless steel surface should be cleaned with a soft, slightly damp cloth and then dried. Avoid abrasive pads, aggressive chemicals and excessive water around the switch or socket. In coastal UAE locations or humid kitchens, regular gentle cleaning can help remove salt, grease and moisture deposits while preserving the finish.

A compatible flush-mounting back box with sufficient width, depth and fixing arrangement is required for the two-gang unit and its cable terminations. As the product measures approximately 42 x 147 x 86 mm, the installer should verify the ABB Millenium frame, mechanism and box compatibility before wall finishing. Extra depth may be needed to accommodate larger cooker-circuit conductors without sharp bends or terminal strain.

It should be positioned where it is readily accessible for local isolation but not exposed to excessive heat, steam, splashing water or cooking contamination. The exact location and separation from the appliance, sink and other services should follow the approved kitchen layout, appliance instructions and applicable electrical-zone or authority requirements.

The ABB Millenium AM118147-ST is a flush-mounted cooker control unit combining a 45A cooker control switch with a BS 13A switched socket outlet. It is designed to provide convenient local isolation of a compatible fixed cooking appliance while also providing a separate socket for a suitable portable appliance. Its stainless steel finish coordinates with compatible ABB Millenium frames and accessories.