ABB Millenium 5A Double Pole Single Switched Socket Antique Gold AM22186-AG

Isolate the circuit before cleaning, then wipe the visible surface with a soft, dry or lightly dampened cloth. Do not use abrasive pads, metal polish, solvents or aggressive chemicals, as they may damage the decorative finish. Loose mounting, heat marks, unusual odours or intermittent operation should be investigated promptly by a qualified electrician.

Inspection should confirm secure mounting, correct alignment, undamaged terminals, proper conductor termination and compatibility with the specified 5A round-pin plug. Electrical testing should cover protective-conductor continuity where applicable, insulation resistance, polarity, switching of both poles and functional operation. Test results should be recorded as required by the consultant, contractor and relevant UAE authority.

Protective earthing must follow the terminal arrangement, circuit design and applicable electrical regulations. The electrician should never assume conductor functions from colour alone and must verify live, neutral and protective conductors using suitable test equipment. All required earth connections and bonding provisions must be completed before the circuit is energised.

It should not be treated as an outdoor or weatherproof socket unless the complete installed assembly has an appropriate verified IP rating for the location. In bathrooms, kitchens, balconies, gardens or other damp areas, socket positioning and enclosure protection must comply with the applicable electrical zones, local regulations and project specifications.

Yes. The antique gold finish is well suited to villas, hotels, executive offices, majlis rooms and premium apartments where electrical accessories form part of the interior design. Designers should coordinate it with the surrounding ABB Millenium accessories, frames, door hardware and decorative finishes to maintain a consistent appearance.

Key specifications include a 5A rated current, 250V AC rated voltage, 5A round-pin outlet, double-pole switching, 1-gang configuration and flush-mounted installation. Its stated dimensions are 35 x 86 x 86 mm, and the visible finish is antique gold.

Yes, it can be incorporated into different wall systems when a suitable flush box and approved installation method are used. For concrete or blockwork, the box and conduit should be accurately positioned before plastering. For drywall, use a compatible cavity box fixed securely to the partition system. The finished face should remain level, accessible and free from excessive plaster or paint.

Contractors should verify that the selected flush box, frame and wall opening are compatible with the ABB Millenium mechanism and its 86 x 86 mm face dimensions. The product has an overall stated depth of 35 mm, but additional space may be needed for conductors and terminal bend radius. Compatibility should therefore be checked before closing blockwork, drywall or decorative wall finishes.

The AM22186-AG is designed for flush installation, with the fixed wiring and compatible mounting box concealed behind the finished wall. The supply must first be isolated and verified as de-energised. A qualified electrician should terminate the conductors at the marked terminals, secure the mechanism without trapping cables, fit the matching frame and complete continuity, polarity, insulation and functional tests before energising the circuit.

Its 250V AC rating is compatible with the nominal low-voltage supply commonly used in the UAE. However, suitability depends on the approved project specification, circuit design, plug type and requirements of the relevant local authority. Installation should follow applicable UAE electrical regulations and the rules of authorities such as DEWA, ADDC or SEWA, as relevant to the emirate.

No. Air conditioners, water heaters, power tools and other high-load equipment commonly require dedicated circuits, higher-rated outlets or fixed connection units. This 5A socket should only serve a compatible load within its documented rating and the electrical design approved for the project.

The socket is intended for compatible low-current equipment fitted with the correct 5A round-pin plug, such as selected lamps and controlled lighting loads. The connected equipment must not exceed the socket's 5A, 250V AC rating, and plug compatibility should be confirmed before installation.

Double-pole switching disconnects both the live and neutral conductors when the socket is switched off. This provides more complete local isolation than a single-pole switch, provided the circuit has been correctly wired by a qualified electrician.

The ABB Millenium AM22186-AG is a 1-gang, flush-mounted 5A round-pin socket outlet with an integrated double-pole switch. It is rated for operation at up to 250V AC and features an antique gold finish for premium residential, hospitality and commercial interiors.