ABB Millenium 5A Double Pole Single Switched Socket Silk Black AM22186-SB

Key specifications include a 5A rated current, 250V AC rated voltage, 5A round-pin socket configuration, double-pole switching, 1-gang format and flush-mounted installation. Its stated overall dimensions are approximately 35 x 86 x 86 mm, with an 86 mm face width. The product is intended for permanent fixed-wiring installations and includes terminals designed for secure conductor termination.

Double-pole switching means the socket's switch disconnects both the live and neutral conductors simultaneously. This offers more complete local isolation than a single-pole switch, which normally interrupts only the live conductor. It does not replace circuit-level isolation at the distribution board, and the circuit must still be made safe before inspection, maintenance or installation.

This outlet is intended for compatible low-current equipment fitted with the correct 5A round-pin plug, subject to the appliance manufacturer's requirements and the circuit design. Typical project applications may include selected lamps, lighting points or designated controlled loads. The connected equipment must not exceed the socket's 5A rating, and plug compatibility must be verified before use.

No. A 5A socket is not suitable for high-load equipment such as electric kettles, heaters, large kitchen appliances or heavy-duty construction equipment. At 250V, the theoretical maximum corresponding to 5A is 1,250W, but the actual permitted load depends on the appliance, wiring, protective device, operating conditions and applicable electrical design requirements. Use an outlet and circuit specifically rated for the intended appliance.

Its 250V AC rating is compatible with the UAE's nominal low-voltage supply environment when incorporated into a correctly designed circuit. However, the 5A round-pin format is a specialised outlet rather than the standard general-purpose socket used for many UAE appliances. The consultant or electrical contractor should confirm acceptance under the applicable authority requirements, such as DEWA, ADDC, SEWA or the relevant local authority, together with current UAE electrical regulations and project specifications.

The socket is designed for flush mounting, with the wiring and mounting box concealed behind the finished wall. Installation generally involves isolating the circuit, confirming dead conditions with an approved tester, checking the compatible back box and available depth, terminating conductors at the identified terminals, tightening connections to ABB's specified torque, securing and aligning the mechanism, and fitting the matching frame. Final polarity, insulation resistance, continuity, protection and functional tests should be completed before energisation.

Installation should be carried out by a qualified electrician or an electrical contractor authorised for work in the relevant UAE emirate. Fixed-wiring work requires correct conductor selection, circuit protection, earthing arrangements, polarity checks and electrical testing. Always follow ABB installation instructions, approved project drawings, current UAE regulations and the requirements of the local electricity authority.

Contractors should verify the approved material schedule, 5A round-pin plug requirement, 250V AC rating, double-pole switching requirement, 1-gang configuration, flush-box compatibility, back-box depth, cable size, terminal capacity and Silk Black finish. They should also confirm coordination with the matching ABB Millenium frame and other accessories, since mechanisms and frames from different ranges may not be interchangeable.

The product information indicates that a matching frame completes the installed finish, but package contents should be confirmed before ordering because ABB Millenium mechanisms and decorative frames may be supplied or specified separately depending on the listing and project configuration. For multi-room construction orders, confirm the exact frame code, finish and quantity with FEPY.com.

It can be installed in either wall type when a compatible flush box and the correct fixing method are used. Masonry installations require a suitable concealed box positioned flush with the completed plaster or tile level. Drywall installations require an approved cavity-wall box secured to the board or supporting system. The installer must maintain adequate box depth, cable bend radius, faceplate alignment and clearance from other building services.

Do not assume that the standard flush-mounted unit is weatherproof or suitable for wet locations. Bathrooms, external walls, gardens, balconies and construction areas exposed to moisture or dust may require a suitably IP-rated enclosure, additional protection and compliance with location-specific wiring zones. Suitability must be assessed by the project electrical engineer or qualified electrician using ABB documentation and applicable UAE requirements.

Circuit protection must be selected by the electrical designer according to the cable size, installation method, connected load, fault level and applicable regulations. The socket's 5A rating must not be treated as a substitute for correctly coordinated overcurrent and residual-current protection. Where required by UAE regulations or the local authority, an appropriate RCD or RCBO should be included and verified through testing.

Keep the face dry and clean it only with a soft cloth; avoid abrasive cleaners, solvents and excessive moisture that could damage the Silk Black finish. Periodically check for heat discoloration, cracking, looseness, arcing sounds or unreliable switching. If any defect is found, stop using the outlet and have the circuit isolated and inspected by a qualified electrician. Internal terminals should never be accessed while energised.

The AM22186-SB combines a compact 1-gang format, concealed flush installation, local double-pole control and a contemporary Silk Black finish. It is suited to residential, hospitality, office and premium fit-out projects that specifically require a 5A round-pin controlled outlet. Its coordinated appearance can also help contractors maintain a consistent accessory finish across an ABB Millenium electrical installation.