أنبوب السباكة (Al Gawas) البلاستيكي (PVC) قياس (2.2MM) طول (6M) سماكة (110MM) بمعدل ضغط (Cl-6)

Key specs: 110 mm outer diameter, 6 meters in length, 2.2 mm wall thickness, made from virgin PVC, CL-6 Al Gawas variant with a matte finish. It’s designed for high‑pressure, long‑term use and has low friction for easier installation.

CL-6 Al Gawas pipes are designed for enhanced corrosion and chemical resistance with a matte finish and virgin PVC composition. They are positioned for high‑pressure, long‑term applications, offering improved durability over standard PVC pipes.

Ideal for irrigation, general plumbing, drainage, cooling systems, fire protection networks, and waste disposal. Its high‑pressure rating and chemical resistance make it suitable for demanding installations.

Recommended steps: measure and cut squarely using a suitable saw, deburr edges, dry‑fit with fittings, apply appropriate PVC primer and solvent cement, insert fittings securely, and support the pipe every 1–2 meters. Use proper clamps and avoid tight bends beyond the pipe’s minimum bend radius.

Use personal protective equipment when cutting and assembling, ensure adequate ventilation when using solvents, and follow local codes for piping installations. Store and handle PVC pipes away from direct prolonged sunlight and excessive heat, and verify chemical compatibility for the intended use.

If you’re exploring alternatives, you can check other CL-6 Al Gawas PVC pipes on Fepy with varying wall thicknesses or similar diameter options. For example, Al Gawas CL-6 110mm x 6m PVC pipe variants in different thicknesses (e.g., 2.0mm or 2.5mm) are commonly listed on Fepy. Example alternatives (availability may vary):

This pipe combines high‑pressure capability, corrosion resistance, and a matte finish, which often places it at a value point suitable for professional and industrial projects. Compare total cost per meter and compatibility with your required pressure rating and environment to determine the best value.

You’ll typically need: a PVC pipe cutter or fine‑tooth saw, deburring tool, PVC primer, solvent cement, matching PVC fittings (elbows, tees, couplings), clamps or supports, and measuring tape. Ensure all fittings are rated for the same PVC grade and pressure as the pipe.

PVC pipes like the CL-6 Al Gawas variant offer long‑term durability due to excellent corrosion and chemical resistance and a low‑friction inner surface. With proper installation and operating within recommended limits, you can expect many years of reliable service in suitable environments.

The CL-6 variant is designed for high‑pressure applications and general piping uses. Always operate within the pipe’s rated pressure for the given diameter and wall thickness, and avoid exposing PVC pipes to temperatures outside their recommended range to prevent deformation or failure.

Store in a cool, dry place away from direct sunlight. Keep the pipe flat or supported to prevent sagging and kinking. When transporting, avoid heavy impacts and bending beyond the recommended bend radius to maintain structural integrity.