Question 1

What is Asian Paints Berger AR Primer and what does it do?

Accepted Answer

Asian Paints Berger AR Primer is a high-performance acrylic primer designed to form a firm anchor on walls. It fills minor surface cracks, protects against moisture and water seepage, enhances adhesion for the topcoat, and is suitable for both interior and exterior surfaces.

Question 2

Which surfaces can AR Primer be used on?

Accepted Answer

AR Primer can be applied on wood, metal, concrete, and masonry surfaces. It is suitable for interior and exterior applications, making it a versatile base coat for a variety of substrates.

Question 3

How does AR Primer improve adhesion and moisture protection?

Accepted Answer

The acrylic resin–based formulation creates a strong bond with the substrate, reduces suction, and provides a protective barrier against water and moisture. It also contains fillers to address minor surface cracks, helping the subsequent topcoat adhere better and last longer.

Question 4

Is AR Primer suitable for both interior and exterior use?

Accepted Answer

Yes. AR Primer is formulated for use on interior and exterior surfaces, providing adhesion and moisture protection across a range of environments.

Question 5

How do I apply AR Primer (prep, method, and drying times)?

Accepted Answer

Prep: Clean and dry the surface; repair and sand any rough areas. Application: Stir well and apply with a brush, roller, or spray in a thin, even coat. If the surface is very porous, a second coat may be beneficial. Drying: Let the primer dry to the touch before top coating; drying times vary with temperature and humidity, so follow the can’s guidance and recoat after the recommended interval on the label.

Question 6

What finish and coverage should I expect from AR Primer?

Accepted Answer

AR Primer provides a smooth, opaque base that enhances the appearance of the topcoat and improves its performance. Coverage depends on surface porosity and conditions; on porous surfaces, you may use more than one coat to achieve a uniform base.

Question 7

What safety precautions should I follow when using AR Primer?

Accepted Answer

Work in a well-ventilated area. Protect skin and eyes by wearing gloves and goggles. Avoid inhaling fumes; if present, use a mask suitable for painting. Keep away from flames and heat sources, and store the product in a cool, dry place away from children and pets. In case of contact with skin or eyes, rinse thoroughly with water and seek medical advice if irritation persists.

Question 8

How should AR Primer be stored and handled?

Accepted Answer

Store in a cool, dry place with the lid tightly closed. Keep away from direct sunlight and extreme temperatures. Ensure containers are upright and not damaged to prevent leaks or contamination.

Question 9

Can AR Primer be used over existing paint surfaces, and how should I prepare them?

Accepted Answer

AR Primer can be used over properly prepared existing paint surfaces that are sound and well-adhered. If the old paint is peeling or flaky, remove loose material, clean the surface, lightly sand to create a key, and then apply the primer. For oil-based paints, a compatible bonding primer may be recommended before applying AR Primer.

Question 10

What are good alternative primers on Fepy.com to compare with AR Primer, and where can I find them?

Accepted Answer

If you’re comparing options on Fepy, you can review the following primers for side-by-side suitability: Berger Exterior Primer (for outdoor surfaces) at https://fepy.com/product/berger-exterior-primer and Berger Interior Primer (for indoor surfaces) at https://fepy.com/product/berger-interior-primer. These are commonly listed primers in the Berger line on many Indian market retailers and are available on Fepy. Use these to compare adhesion, finish, and suitability for interior vs exterior projects.

Question 11

What are typical use cases for AR Primer in home projects?

Accepted Answer

Use AR Primer as the base coat for walls and surfaces that are wood, metal, concrete, or masonry, both indoors and outdoors. It’s ideal when you have minor cracks to fill, when you need improved adhesion for the topcoat, or when moisture protection is a priority (for bathrooms, kitchens, balconies, or damp basements). It prepares imperfect surfaces for a durable, uniform finish.

Sheen Variants	Matt, Smooth
Colors	White
Volume Solids	32 ± 2%
Area of Use	Ideal for priming Interior & Exterior surfaces.
Substrate	Concrete, plaster, brickwork, blockwork, gypsum.
Method of Application	Roller /Brush application
Thinner	Sweet water
Thinning ratio (by vol.)	Use 5% to 10% sweet water for ease of application depending on the method of application.
Thinned paint	Should be used within the same day

معجون إيه آر برايمر من ( ايشيان بينتس برجر )

Features & Benefits

Specification

Attachments

Frequently Asked Questions