معجون أساس بلاستيكي فاليو من ايشيان بينتس برجر بالأكسيد الأحمر حجم (18L)

It covers approximately 160 to 180 square feet per litre on smooth, flat mild steel surfaces, with coverage varying based on application method and surface conditions.

The primer dries to the touch in about 30 minutes, with a recoat time of 6 to 8 hours under standard conditions (25°C and 50% humidity).

Store the primer in a cool, dry place away from direct sunlight and excessive heat. It has a shelf life of 18 months when kept in its original, tightly closed container.

The primer is flammable and should not be applied in temperatures below 10°C. Use protective gear such as gloves and goggles during application to avoid skin and eye contact.

The primer can be thinned with mineral turpentine oil (MTO) if needed, but over-thinning is discouraged to maintain its performance characteristics.

It is an oil-modified alkyd-based primer, pigmented with micro-fine red oxide and extenders, ensuring good flow, levelling, and anti-settling properties.

Use in well-ventilated areas, avoid inhaling vapours, keep out of reach of children, and wash with water in case of skin or eye contact. Seek medical attention if irritation persists.

It's a water-based primer designed as a protective base coat for interior and exterior surfaces. It can be applied directly on masonry and is suitable for ferrous and non-ferrous metals. It dries quickly, provides excellent adhesion and sealing properties, and offers extra protection with good coverage in a single coat.

You can use it on plaster, cement, wood, brick, stone, and metal. It’s suitable for both interior and exterior applications and can be applied directly to masonry surfaces as a base coat.

Key features include direct application on masonry, compatibility with both ferrous and non-ferrous metals, quick-drying, strong adhesion and sealing, and the potential for better, single-coat coverage. It is designed to provide durable protection against water, humidity, alkalis, and acidic contaminants.

Preparation is important: ensure surfaces are clean, dry, and free of loose material. Stir the primer well, then apply using a brush, roller, or spray gun. Allow it to dry to the touch before applying the next coat or topcoat. Use the topcoat recommended by the paint manufacturer after the primer has dried.

The primer is designed to provide a smooth base with good opacity, improving adhesion for the topcoat. Coverage depends on surface porosity and method of application; follow the product label for approximate coverage on different surfaces.

Being water-based, it generally has lower odor and is easier to work with in interiors. Ensure adequate ventilation during application. For specific safety and composition details, refer to the SDS provided by the manufacturer.

Most water-based and solvent-based topcoats are compatible when applied according to their own guidelines. Always follow the topcoat manufacturer's recommendations regarding drying times and recoat windows after applying this primer.