مستحلب قشر البيض الأكريليكي البلاستيكي اشيان بينتس برجر 0615 لأعمال الإنهاء سعة 18L

This emulsion is suitable for a variety of substrates including concrete, plaster, masonry, brickwork, blockwork, gypsum, and timber. Proper surface preparation is essential for optimal adhesion and performance.

The drying time varies with temperature: at 25°C, it takes about 4 hours to become touch dry and 8 hours for recoating. At higher temperatures (35°C and 45°C), these times are reduced to 3 hours and 1.5 hours respectively.

The theoretical covering capacity ranges from approximately 5.66 m²/L to 8.50 m²/L depending on the thickness of the application. For best results, a typical dry film thickness per coat should be between 40 to 60 microns.

The emulsion can be applied using a brush, roller, or spray equipment. It is recommended to apply at least two coats for optimal coverage and finish. Thinning with water (up to 5% by volume) may be necessary for ease of application.

Ensure adequate ventilation while applying the paint and avoid contact with skin and eyes. Protective clothing such as goggles and masks should be worn. The product should be kept out of reach of children.

The paint should be stored in a cool, dry place away from direct sunlight. It has a shelf life of up to 24 months from the date of manufacture if stored properly.

Yes, Asian Paints Berger Eggshell Emulsion Silk has very low VOC levels, making it compliant with various environmental standards. It also features anti-microbial properties that help maintain hygienic wall conditions.

Asian Paints Berger Select Eggshell Emulsion Silk is a high-grade water-based interior wall paint that dries to a silk-like eggshell finish. It offers seamless coverage with a uniform sheen, strong hide, and good washability. The eco-friendly formula includes anti-fungal and anti-bacterial properties, plus protection against UV damage for a durable, easy-to-clean surface.

This product is designed primarily for interior walls, ceilings, and surfaces that benefit from a smooth, washable finish. Some formulations may be suitable for exterior use, but always refer to the product label or the Fepy listing to confirm exterior suitability before applying to outside walls.

Key specifications and attributes include: water-based formulation; eggshell silk finish for a rich, silk-like look; strong coverage and hiding power; washable and scrubbable surface; anti-fungal and anti-bacterial properties; UV protection for color retention; eco-friendly formulation.

For best results: clean the surface to remove dust and stains; repair any cracks or holes; sand rough spots for a smooth base; remove loose paint; on bare or repaired surfaces, apply an appropriate primer. Stir the paint thoroughly before use and ensure the surface is dry and dust-free prior to application.

Coating recommendations can vary based on the colour and surface. Typically, an even finish is achieved with one or two coats. Drying and recoat times depend on ambient temperature and humidity; follow the product label for precise guidance on drying to touch and recoat intervals.

Apply with a high-quality brush or roller suitable for smooth interior finishes. Start with edges and corners, then fill in large areas with even strokes to minimize lap marks. Use long, even passes and maintain a wet edge. If thinning is required, do not exceed the manufacturer’s recommended level and mix thoroughly.

Yes, as a water-based interior paint, it is designed for indoor use with a relatively low odor profile. The formulation includes eco-friendly attributes and anti-fungal/anti-bacterial properties, making it suitable for homes and common living spaces when used as directed.