Asian Paints Berger Floor Guard Epoxy Top Coat, 20L Base + 5L Hardener, Royal Blue, Heavy-Duty Epoxy Floor Finish

Suitable for concrete, masonry, wood, and similar substrates. It’s commonly used on driveways, garages, warehouse floors, balconies and other areas where a tough, glossy protective coating is desired.

The product is available in Royal Blue and comes in two sizes: 5L and 20L.

Coverage is listed as about 16 m2 per 5L and up to 80 m2 per 20L, though actual coverage depends on surface texture, porosity, and the number of coats applied.

For best protection, apply 1–2 coats using a brush, roller, or spray. Stir well before use and between coats. Allow adequate drying between coats and follow the label’s guidance for recoat times under your working conditions.

Start with a clean, dry surface. Remove dust, dirt, oil and contaminants. Repair cracks or imperfections as needed and ensure the surface is fully dry before coating.

Yes, it’s designed for both indoor and outdoor use. Use in a well-ventilated area and wear appropriate PPE (gloves, goggles). Avoid skin/eye contact, and keep away from children. Follow the product’s SDS and label instructions for safe handling.

The 5L variant is more portable for small projects, while the 20L variant provides greater total coverage and cost efficiency for larger areas. Choosing between them depends on project size and budget. 5L page: https://fepy.com/product/asian-paints-berger-floor-guard-epoxy-top-coat-royal-blue-5l and 20L page: https://fepy.com/product/asian-paints-berger-floor-guard-epoxy-top-coat-royal-blue-20l

Typically it dries to the touch within several hours and can be recoated after a similar interval, with full curing taking 24–48 hours under normal conditions. Temperature and humidity can affect these times.

Store in a cool, well-ventilated area away from direct sunlight and heat sources. Keep the container tightly closed when not in use and ensure it’s out of reach of children and pets.

This is an epoxy-based coating, so follow the SDS for safety handling, storage, and disposal. Use PPE as recommended, avoid skin/eye contact, and ensure adequate ventilation during application. Do not use in food-contact surfaces unless explicitly approved.

The product provides a durable, high-gloss, protective coating that reduces maintenance for floors exposed to wear and moisture. It’s available in two sizes to fit different project scopes, helping you optimize cost per square meter. For return specifics, refer to Fepy’s standard return policy on unopened items within the allowed window.