Asian Paints Berger Royale Luxury Matt Emulsion, 1L, Earl Grey, Trial/Trim Pack, Easy Apply

Earl Grey offers a modern, refined gray tone that adds depth to walls without appearing flat. It pairs well with contemporary interiors and stays true to form over time with its matte, velvety appearance.

Yes. It is designed to adhere well to plaster and new walls, especially when the surface is properly prepared and primed to ensure optimal adhesion and a smooth finish.

Two coats are typically recommended for a consistent, rich finish. Allow each coat to dry for about 4–6 hours under normal conditions; drying times can vary with temperature and humidity.

Stir the can well before use. Use a quality synthetic brush or roller, apply with even strokes, and maintain a wet edge to avoid lap marks. Lightly back-roll to even the coating, and avoid overloading the tool to minimize splatter and brush marks. Allow adequate drying time between coats.

Being water-based, it cleans up easily with water and soap. Ensure proper ventilation during application, use protective gear as needed, and keep away from children. Dispose of any leftover paint according to local guidelines.

Royale Luxury Matt delivers a true matte surface with a softer sheen and less reflectivity than silk matte or gloss. It tends to show fewer surface imperfections and is typically easier to touch up, though it may be less washable than glossier finishes in heavy-use areas.

Yes, there are multiple shades available within the Royale Luxury Matte Emulsion line on Fepy. You can explore the category to see the full shade range and select other colors that match your design vision.

Royale Luxury Matt offers a deeper, more pronounced matte finish with a premium look, while Silk Matte provides a slightly sheerer sheen and often a bit more washability. Choose based on the desired level of sheen and the amount of cleaning the wall will require.

The product is formulated to resist dampness and stains, making it suitable for many interior walls. For very high humidity areas like bathrooms, ensure adequate ventilation and consider testing a small area first or using a moisture-resistant option if needed.

Start with a clean, dry surface. Repair cracks and holes, sand glossy areas to dull the surface, remove dust, and apply a suitable primer on new plaster or uneven surfaces to improve adhesion and finish quality.

It offers a premium matte finish, good adhesion, and durable performance for interior walls. When comparing value, consider shade accuracy, finish preference, coverage per litre, maintenance needs, and how the colour will look in your lighting conditions.

Here are a few comparable options on Fepy with direct product URLs: - Berger Silk Matte Emulsion 1L: https://fepy.com/product/berger-silk-matt-emulsion-1l - Dulux EasyClean Matt Emulsion 1L: https://fepy.com/product/dulux-easyclean-matt-emulsion-1l - Nippon UltraMatt Emulsion 1L: https://fepy.com/product/nippon-ultramat-emulsion-1l - Asian Paints Apex Economy Matt Emulsion 1L: https://fepy.com/product/asian-paints-apex-economy-matt-emulsion-1l