طلاء سيليكت اكريليكي بلاستيكي ناعم الملمس من ايشيان بينتس برجر

The product is pigmented with titanium dioxide and reinforced with mineral quartz and mica. It includes fungicides and algaecides in its formulation, ensuring durability and resistance to fungal growth, making it suitable for various substrates like concrete, plaster, and masonry.

The recommended application methods for Select Fine Texture are brush and roller. For ease of application, it can be thinned with sweet water at a ratio of 5% to 10%, but care should be taken not to over-dilute.

At a substrate temperature of 25°C, the touch dry time is approximately 2 hours, while it takes about 6 hours to reach hard dry status. The maximum overcoating interval is indefinite, allowing flexibility in application timing.

The theoretical spread rate varies based on the dry film thickness: for 70 microns, it covers approximately 7.28 m²/Ltr, while at 100 microns, it covers about 5.10 m²/Ltr. Practical coverage may be affected by factors such as surface profile and application technique.

Surface preparation is crucial; it must be clean, dry, and free from contaminants. Any fungal growth should be treated prior to application, and surfaces should be sound without any laitance or loose materials.

During application, it is important to wear suitable protective clothing such as goggles and gloves. Ensure adequate ventilation in the area and avoid contact with skin and eyes. In case of accidental splashes, flush eyes with warm water immediately.

The shelf life of this product is up to 24 months from the date of manufacture when stored in cool, dry conditions away from direct sunlight. Proper storage conditions help maintain its quality over time.