طلاء آسيان بينت برجر ، مع مادة بوليمر أكريليك كوبوليمر متوسط الحجم ، أبيض 18 لتر

This product can be applied to a variety of surfaces including concrete, plaster, masonry, brickwork, block work, gypsum, and timber. It effectively levels uneven surfaces and helps cover hairline cracks.

The drying time varies depending on the substrate temperature: at 25°C, it takes about 6 hours to become touch dry, with a maximum overcoating interval of indefinite time. At higher temperatures (35°C), it dries in about 4 hours.

The recommended application methods include brush and roller application. For ease of use, thinning with 5% to 10% sweet water is suggested, but over-dilution should be avoided as it may affect texture quality.

The theoretical covering capacity varies with the dry film thickness. At 100 microns, it covers approximately 5.70 m²/Ltr; at 125 microns, around 4.56 m²/Ltr; and at 140 microns, about 4.07 m²/Ltr.

Yes, the formulation includes fungicides and algaecides that help prevent fungal growth and algae formation on walls. This ensures that the finish remains clean and free from unsightly black spots.

During application, it's essential to wear protective clothing such as gloves and goggles to avoid skin and eye contact. The product should be stored in a cool, dry place away from children, and adequate ventilation should be ensured during use.

The shelf life of Asian Paints Berger Select Medium Texture is up to 24 months from the date of manufacture if stored properly in a cool and dry environment.

Asian Paints Berger Select Medium Texture is a medium-textured acrylic copolymer finish designed for interior walls, with the flexibility to be used on exterior surfaces where appropriate. It provides a smooth look, good washability, and protection against dampness, dust, and dirt, while offering long-lasting performance.

It is suitable for interior walls and can be used on exterior walls as well on appropriate substrates such as wood, cement, and masonry surfaces. Ensure surfaces are clean, dry, and properly prepared before painting.

Key features include a medium-textured finish for visual depth, excellent opacity and coverage, washable and easy to clean, strong resistance to weathering, fading, and cracking, and eco-friendly formulation with low VOCs.

Prepare the surface by cleaning to remove dust and grease, repairing cracks or holes, and sanding glossy areas to improve adhesion. For bare wood or masonry, apply a compatible primer first to ensure optimal bonding and finish.

Stir thoroughly before use. Apply using a synthetic brush, roller, or spray for an even finish. Typically apply 1–2 coats, allowing proper drying time between coats as per label instructions. Ensure good ventilation and avoid painting in extreme humidity or heat.

Coverage depends on surface texture and porosity. As a general guide, expect around 10–12 m2 per litre per coat, with two coats achieving full opacity and texture. Actual yield may vary with surface condition.

The acrylic copolymer formulation offers resistance to dampness and moisture and is washable, allowing you to clean the surface without significantly affecting the finish.