سائل العزل (FBR) ايشيان بينتس برجر سمارت كير وزن (25kg)

Yes. It is formulated for interior and exterior applications, making it versatile for repairing cracks, holes, and dents on various wall surfaces.

The product comes premixed and ready to use. If needed, add a small amount of clean water to achieve a smooth, paintable paste. Use a trowel or putty knife to apply in thin, even layers, and smooth the surface for a uniform finish.

Coverage depends on the thickness of the application and the size of defects. It’s designed to repair small holes, fine cracks, and dents efficiently, and you may need more than one bag for larger areas or thick fills.

Yes. SmartCare Repair FBR is designed to be water-resistant and resistant to cracking, helping maintain a durable finish in varying weather and moisture conditions.

Absolutely. The repaired surface is repaintable, allowing you to match your wall color once the product has cured.

Touch-dry can occur within a few hours, with full cure typically achieved within 24–48 hours, depending on ambient temperature, humidity, and thickness of application.

Since it is a cement-based product, wear gloves to protect your skin and ensure good ventilation during application. Keep out of reach of children and store the product in a dry place.

Nerolac Wall Repair Putty is another cement-based repair option with its own cure times and finish characteristics. Both products are designed to repair walls, but you may choose based on finish preference, ease of use, and color options. Nerolac product page: https://fepy.com/product/nerolac-wall-repair-putty-20kg

Birla White Wall Repair Putty offers a competing repair option with its own application characteristics. Consider factors like surface finish, ease of application, and price when choosing. Birla White product page: https://fepy.com/product/birla-white-wall-repair-putty-20kg

Consider the required finish (smoothness, color matching), indoor vs outdoor use, waterproofing needs, cure time, ease of application, and cost per kilogram. Brand reliability and compatibility with existing wall conditions are also important.

Start with a clean, dust-free surface. Dampen mildly if needed, then apply in thin layers with a trowel or putty knife, allowing each layer to set before applying the next. Lightly sand between coats for a smooth surface, and finish with the desired paint after full curing.