لاصق البلاط ايشيان بينتس برجر سمارت كير وزن (25kg)

The adhesive is available in white and grey colours and has a coverage of approximately 5.2 m² per 20 kg bag at a thickness of 3-4 mm. It offers good workability, resistance to humidity, and is easy to apply, making it economical for various tiling projects.

To mix, combine 4 to 5 liters of water with a 20 kg bag of adhesive until a uniform, lump-free consistency is achieved. The adhesive should be applied at a thickness of 3-6 mm on the surface, working on areas not exceeding 1 m² at a time.

The open time at 35°C is approximately 30 minutes, meaning that the mixed adhesive should be used within this timeframe. The pot life is around 45 minutes, allowing sufficient time for application before it begins to set.

Yes, it is recommended to wear gloves and safety goggles during application to prevent skin contact. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical attention if necessary.

SmartCare Tile Adhesive GP can be used on sound, clean surfaces free from dirt or grease. However, it should not be applied on painted or metal surfaces, as these may affect adhesion.

The shelf life of SmartCare Tile Adhesive GP is 12 months when stored in unopened packs in a cool and dry place. Proper storage conditions are essential for maintaining its effectiveness.

Yes, the SmartCare Tile Adhesive GP can be used for both interior and exterior applications, making it versatile for various tiling needs. It is particularly effective in wet and dry areas due to its excellent bonding properties.

Asian Paints Berger SmartCare Tile Adhesive GP 20Kg is a ready-to-use tile adhesive designed to bond tiles securely to various substrates. It is suitable for both floor and wall tiles and is formulated for strong adhesion, durability, and reliable performance in typical tiling projects.

It is formulated to bond well with a range of substrates such as concrete, cement, gypsum boards, bricks, ceramic tiles, and marble. It supports most common tile types used in interior tiling projects and is suitable for both wall and floor installations.

Yes. The adhesive features water resistance and is designed to perform in wet or damp environments, making it suitable for bathrooms, kitchens, and other moisture-prone areas when used as directed.

Prepare a clean, dry substrate. Use the product as a ready-to-use adhesive and apply with a suitable notched trowel. Back-bedding or combing the adhesive helps achieve uniform transfer to the tile back. Place the tile, press firmly, and ensure consistent spacing. Allow the adhesive to set as per the product guidelines before grouting.

The product is described as ready-to-use. Follow the packaging instructions; generally, no extensive mixing is required beyond opening the bag and applying as directed. If your specific batch requires dilution or preparation, use only the method specified on the label.

Allow the adhesive to set adequately before grouting. Actual times depend on ambient conditions (temperature, humidity) and tile size. In typical conditions, plan for grout application after the adhesive has sufficiently cured as indicated on the product packaging.

Store the bag in a cool, dry place in its sealed packaging. Keep away from moisture, direct sunlight, and children. Use the contents within the recommended shelf life and keep the bag securely closed when not in use.