مخفف الطلاء الايبوكسي ايشيان بينتس برجر (Solvalux 7 45) ذو الأداء العالي (4L)

It’s a high-solvency thinner designed to thin epoxy paints for smoother application, better flow, and faster drying. It’s compatible with epoxy primers, topcoats, and rust-preventive coatings to help you achieve professional-looking finishes.

You can thin various epoxy coatings including primers, topcoats, and rust-preventive epoxy coatings. It’s formulated to reduce viscosity and improve leveling, helping to minimize brush or roller marks.

Start with a conservative amount and adjust to the desired viscosity. A common starting point is around 5–15% thinner by volume, but always follow the epoxy product’s specific recommendations. Avoid over-thinning, which can compromise film strength.

Key benefits include improved flow and finish, easier brush/roller application, faster drying, low odor, and simpler tool cleanup. It also helps with better adhesion and coverage when used with compatible epoxy coatings.

It’s suitable for industrial, commercial, and residential projects, especially metal and concrete surfaces that use epoxy coatings. It supports rust-preventive coatings and can be used across primers, bases, and topcoats to speed up project timelines.

Add thinner gradually to the epoxy coating until you reach the desired viscosity. Stir thoroughly, avoid introducing air bubbles, and maintain proper temperature and ventilation during application. Apply in clean conditions to maximize flow and finish.

Clean tools with the thinner itself or with an appropriate epoxy-compatible solvent before the thinner dries. Rinse until the solvent runs clear, then wash with soap and water if needed. Dispose of used solvent according to local regulations.

Treat it as a flammable liquid: keep away from ignition sources, provide good ventilation, wear protective gloves and eye protection, and avoid prolonged skin contact. Store in a cool, dry place away from heat and direct sunlight.

Store in a tightly closed container in a cool, dry, well-ventilated area away from open flames. Keep away from children and pets. Check the packaging for expiry date and do not use if the product appears severely degraded.

Comparable options on Fepy include: - Berger Solvalux 7-45 Epoxy Thinner 1 Litre — URL: https://fepy.com/product/berger-solvalux-7-45-epoxy-thinner-1-litre (similar performance with a slightly different odor profile) - Asian Paints Berger Solvalux Epoxy Thinner 500ml — URL: https://fepy.com/product/asian-paints-berger-solvalux-epoxy-thinner-500ml (smaller pack for tighter projects) - Solvalux Epoxy Thinner Industrial 5 Litre — URL: https://fepy.com/product/solvalux-epoxy-thinner-industrial-5-litre (larger volume for ongoing use and cost efficiency)

Yes, if your project uses epoxy coatings regularly, the 1 USG size offers a convenient balance of coverage, ease of use, and cost. It helps you achieve better finishes with less waste due to easier application and reduced rework from brush/roller marks.

For a metal surface coated with an epoxy rust-preventive primer, mix the thinner in small increments to reach the ideal viscosity for a smooth spray or roller application. This helps minimize brush marks, speeds up drying, and delivers a uniform finish across large panels.