معجون فاليو ميكس من ايشيان بينتس برجر البلاستيكي لون أبيض حجم (1L)

Start with a clean, dry surface. Stir the filler to a creamy consistency and add a small amount of water if needed to reach a smooth paste. Apply with a putty knife or trowel, pressing into holes or cracks and smoothing flush with the wall. Let it dry, lightly sand for a fine finish, then prime before painting.

It is suitable for masonry surfaces such as plaster, concrete, and cement renders, and works for both interior and exterior walls.

Yes. It is formulated to fill cracks, dents, joints, and uneven areas, helping to level the surface before painting.

It dries to the touch in a few hours, with full cure depending on thickness and climate. After it dries, you can sand the surface and apply primer and paint once the area is firm.

Yes, it accepts paint. It is available in a range of colors to match common wall shades and can be tinted to achieve closer color matching.

Yes. Once fully dry, you can sand the surface to achieve a smooth finish before priming and painting.

Being water-based, it has low odor and is suitable for indoor use. Wear gloves, ensure good ventilation, and avoid prolonged skin contact.

Store in a cool, dry place with the lid tightly closed. Keep away from moisture. If the material dries out in the container, discard and start with a fresh tub.

For exterior masonry repairs requiring strong adhesion, this filler is a dedicated option. If you’re primarily working on interior walls, Berger Wall Putty is a common alternative. For small or hairline cracks, Berger Crack Filler is also available. See these alternatives on Fepy: Berger Wall Putty https://fepy.com/berger-wall-putty, Berger Crack Filler https://fepy.com/berger-crack-filler, Berger Stucco Patch https://fepy.com/berger-stucco-patch

Returns follow Fepy's general returns policy. Check the Returns page for eligibility and conditions: https://fepy.com/returns

Common use cases include repairing cracks and dents in plaster or masonry walls, leveling rough surfaces prior to painting, and preparing both interior and exterior walls for a smooth, paint-ready finish in homes and commercial spaces.