طلاء أكريليك للتغطية الأساسية من ايشيان بينتس برجر (White ) سعة (1Ltr )

One liter of Asian Paints Berger Under Coat typically covers 8-10 square meters, depending on surface porosity.

It is primarily designed for interior surfaces but can be used on protected exterior walls as well.

Yes, it enhances the adhesion of the final paint layer, ensuring a longer-lasting and more uniform finish.

Yes, it is suitable for application on plaster, concrete, cement, and previously painted surfaces.

The undercoat dries to the touch in about 30-60 minutes under normal conditions.

Yes, it can be easily applied using a brush, roller, or spray.

Asian Paints Berger Under Coat is a high-adhesion primer designed to provide a smooth, durable base for top coats. It improves intercoat adhesion, helps prevent peeling, and enhances the overall finish for both interior and exterior surfaces.

It can be applied to a variety of surfaces, including wood, masonry, and metal, making it suitable for both interior and exterior applications.

It’s formulated to deliver strong adhesion between the substrate and your top coat, resulting in a smoother finish, better coverage, and reduced risk of peeling or cracking over time.

Typically you apply one or two coats depending on the surface and desired finish. Coverage varies by surface and conditions, so refer to the product label on the can for the exact coverage per litre and coat recommendations.

Yes, this under coat is designed for both interior and exterior use, providing a solid foundation for top coats in a range of environments.

Yes. The product is described as low odour and low VOC, making it more suitable for use in homes or offices with improved indoor air quality.

Start with a clean, dry surface. Remove loose material, dust, and grease. Repair any cracks or damaged areas, allow to dry, and then sand lightly for a smooth, uniform base before applying the under coat.

You can apply it with a brush, roller, or spray. Apply evenly in thin coats, follow the grain where applicable, avoid puddling, and allow each coat to dry before applying the next. For best results, follow the application guidelines printed on the can.