جلبة تخفيض الأقطار البلاستيكيّة (PVC) من أطلس قياس (50X32MM)

Size compatibility: it connects 50 mm to 32 mm PVC pipes. Material: durable PVC engineered for long service life. Features: leak‑proof, UV‑resistant, and designed for smooth flow with minimal friction.

The reducer’s smooth interior and streamlined transition minimize abrupt changes in cross‑section, which lowers friction losses and helps maintain steady, efficient fluid flow through the pipe network.

1) Cut both pipes square and clean burrs. 2) Dry‑fit to confirm alignment. 3) Apply PVC solvent‑weld cement rated for the pipe size on both ends. 4) Insert and rotate the fittings to distribute cement evenly. 5) Hold briefly until the bond begins to set, then cure per cement manufacturer’s instructions and test for leaks.

Ideal for small‑bore take‑offs to dosing points, gauges, or lateral lines, and for compact manifolds or equipment skids in villas or plant rooms where a neat step‑down connection is needed.

Yes, the fitting is UV‑resistant and suitable for outdoor use, but prolonged direct sunlight on exposed plastic should be avoided or shielded to preserve appearance and toughness.

If you need a different size, you can explore other PVC reducer bush options on Fepy.com, such as the 50 mm × 25 mm variant (https://fepy.com/product/atlas-pvc-reducer-bush-50mm-25mm), the 40 mm × 32 mm variant (https://fepy.com/product/atlas-pvc-reducer-bush-40mm-32mm), or the 32 mm × 25 mm variant (https://fepy.com/product/atlas-pvc-reducer-bush-32mm-25mm), to match your pipe sizes and flow requirements.

After installation, perform a pressure test or water fill to check for leaks at the joints. Periodically inspect for signs of wear, ensure joint integrity, and re‑cement if any movement or leakage is detected. Keep the area clean and free of debris that could interfere with joints.

Designed for typical PVC plumbing systems, the reducer is best suited for water‑related applications and dosing lines. Use within the pressure and temperature limits specified for your PVC piping system, and avoid exposing the fitting to fluids outside those ratings.

You’ll typically need a PVC cutter or saw, deburring tool, marker, clean cloth, PVC primer (optional but recommended for some codes), PVC solvent‑cement, and gloves. Have a clean workspace and allow curing time per the cement manufacturer.

Protect exposed plastic from prolonged UV exposure where possible, install away from high‑heat sources, and pair with matching compatible PVC fittings and pipes to ensure a tight, leak‑free system that lasts.

With proper installation and normal operating conditions, PVC fittings like this reducer are designed for many years of service, thanks to durable material and corrosion resistance.