Question 1

What is the Atlas 56mm x 1" UPVC Reducer used for?

Accepted Answer

This UPVC reducer is used to connect a 56mm pipe to a 1 inch (25.4mm) pipe, enabling a reliable transition between different pipe sizes in cold-water and drainage installations.

Question 2

What are the key specifications of this reducer?

Accepted Answer

Material: UPVC. Size: 56mm to 1 inch. Intended for cold water and drainage applications. Provides a tight seal, corrosion resistance, and a durable, long-lasting connection. Sold per piece (Per Pcs).

Question 3

Which pipe sizes can I connect with this reducer?

Accepted Answer

One end accepts 56mm diameter pipe and the other end connects to a 1 inch (25.4mm) pipe. Ensure you are matching the correct outside diameters for a proper fit.

Question 4

Where is this reducer suitable to use (applications)?

Accepted Answer

It’s suitable for domestic, commercial, and industrial plumbing projects where a transition from 56mm piping to 1 inch piping is required, especially in cold-water and drainage lines.

Question 5

How do I install this UPVC reducer?

Accepted Answer

Steps: 1) Cut and square both pipes. 2) Deburr and clean the pipe ends. 3) Dry-fit to confirm alignment. 4) Apply UPVC primer (where required) and solvent cement to the outside of the 56mm pipe and the inside of the reducer. 5) Insert fully and hold until set. 6) Allow the joint to cure before testing for leaks.

Question 6

Do I need any special tools or adhesives for installation?

Accepted Answer

Yes. Use UPVC-compatible solvent cement and primer as recommended for UPVC pipe fittings. Have a hacksaw or pipe cutter for clean cuts, a deburring tool, and rags for cleanup.

Question 7

Is this reducer safe for potable water or hot water?

Accepted Answer

This reducer is designed for cold water and drainage applications. UPVC fittings are not intended for hot water use.

Question 8

What are some tips to ensure a leak-free joint?

Accepted Answer

Ensure pipes are clean and burr-free, apply primer where recommended, use the appropriate amount of solvent cement, fully insert the reducer, and hold the joint briefly to prevent back-suck. Allow sufficient curing time before pressurizing the system.

Question 9

How does this reducer compare with other similar reducers available on Fepy.com?

Accepted Answer

If you’re exploring alternatives, consider: Atlas 56mm x 40mm UPVC Reducer (for a different end size) available at https://fepy.com/product/atlas-56mm-x-40mm-upvc-reducer-per-pcs and a 56mm x 32mm UPVC Reducer option at https://fepy.com/product/upvc-reducer-56mm-x-32mm-per-pcs. These provide similar functionality with different end-diameter options to fit your system.

Question 10

What is the return policy if the reducer doesn’t fit or meet my needs?

Accepted Answer

Return policies can vary by product and region. For non-warranty-related returns, check the seller’s standard return terms for items in unused condition with original packaging within the specified return window.

Question 11

Are there any maintenance tips to extend the life of this reducer?

Accepted Answer

Keep the fittings clean and free from debris, ensure a proper seal with compatible solvent cement, avoid exposing UPVC to aggressive chemicals beyond its intended use, and periodically inspect joints for signs of leakage or wear in long-running systems.

وصلة تخفيض الأقطار البلاستيكية أطلس (UPVC) قياس (56MMX1") تباع بالقطعة

وصف المنتج