Atlas PVC Female Socket, 63mm x 2", Threaded End

- Size: 63mm socket x 2" threaded - Dual Connection Design: solvent weld + threaded end - Tight Thread Fit: helps prevent leaks under pressure - Rigid PVC body: ensures strength and stability - Chemical resistant: suitable for multiple applications - Smooth inner bore: reduces flow resistance - Ideal applications: plumbing and water distribution

One end is designed for solvent-weld connection to PVC pipe, while the other end is a standard 2" threaded connection for compatible fittings. Use PVC cement on the socket side and thread sealant or PTFE tape on the threaded end to ensure a secure, leak-free assembly.

Ideal for residential or commercial water distribution, irrigation setups, or any system needing a reliable solvent-weld connection with a threaded outlet for valves, adapters, or other threaded components.

First depressurize the system. Cut and deburr the 63mm pipe square. Apply PVC primer and solvent cement to the socket and pipe, then insert fully for a secure solvent-weld. For the threaded end, apply thread sealant tape or pipe dope rated for potable water and tighten appropriately. Allow cement to cure before pressurizing.

Wear appropriate PPE when cutting or cementing PVC. Ensure chemical compatibility with the fluids in your system and follow local codes for potable water installations. Use approved sealants and adhesives suitable for PVC and water use.

If you need both a secure solvent-weld connection and a threaded outlet, this dual-end design is ideal. Compare with all-solvent-weld fittings or all-threaded fittings to confirm compatibility with your piping and downstream components. Alternatives on Fepy include: Atlas PVC Female Socket 63mm x 2" Slip (Solvent Weld Only) - https://fepy.com/product/atlas-pvc-female-socket-63mm-2-slip; Atlas PVC Female Socket 63mm x 2" Threaded End (All-Threaded) - https://fepy.com/product/atlas-pvc-female-socket-63mm-2-threaded-end

Constructed from rigid PVC, the fitting offers chemical resistance and durability suitable for standard plumbing and water distribution applications, providing reliable performance under typical system pressures.

Use PTFE thread sealant tape or pipe dope rated for potable water on the threaded end, tighten to the recommended torque without overtightening, and ensure threads are clean and free of debris before assembly.

Yes. If the item is unused and returned within the stated window per Fepy’s return policy, you can initiate a return. Be sure to follow the stated steps for returns and ensure the product is in resalable condition.

Yes. Use PVC Primer and Cement for the solvent-weld (socket) end. For the threaded end, have thread sealant tape or pipe dope rated for potable water. You may also want a pipe cutter, deburring tool, and a wrench for proper alignment and tightening.