Atlas PVC Tee, 90mm, Equal Tee, Structural Rigidity

PN16 is the pressure rating, indicating the fitting is suitable for service up to 16 bar (approximately 232 psi). It defines the maximum operating pressure the tee is designed to withstand safely.

Key specs: 90mm nominal size, equal tee configuration (branch and mainline are the same diameter), PVC material, solvent-weld sockets for quick and strong joints, corrosion-resistant, suitable for residential and commercial piping, and rated PN16 for pressure.

Installation steps: cut the 90mm pipe square, clean and deburr the cut, apply PVC primer to the pipe and fitting sockets, apply PVC cement, insert the pipe fully into the sockets, hold briefly to ensure a seal, and allow the joint to cure per the cement manufacturer's instructions before pressurizing the system.

This tee is designed for standard 90mm PVC piping systems with solvent-weld joints. Use it with PVC pipes of compatible outside diameter (OD) and ensure both the pipe and fittings are rated for PN16 to maintain a leak-free system.

Common applications include irrigation networks, landscaping water features, and utility loops where a branch connection is required at a 90mm diameter. It’s well-suited for projects in residential builds and commercial landscapes in environments like UAE irrigation and piping layouts.

An equal Tee has the same diameter on all three ports, making it ideal when you want a straight-through branch without changing pipe size. A reducing tee changes diameter between the main run and the branch, and a street/combination tee has offset socket configurations. Choose based on whether you need a uniform diameter or a step-down/up connection.

Yes. Ensure you use approved PVC cement and primer, work in a well-ventilated area, and follow local plumbing codes. Verify that the PVC material is suitable for potable water if that’s your application, and avoid exposing PVC joints to direct heat or UV light for extended periods unless rated for outdoor use.

Recommended items include PVC primer and cement, a pipe cutter or saw, deburring tool, clean rags, a pipe support or clip for mechanical stability, and a mark/stencil to ensure proper alignment. Always have a spare spare fitting or two for field adjustments.

Yes, you can typically return unused fittings within the store’s stated return window, provided they are in original packaging and unused. Always check the current return terms on Fepy for precise timelines and conditions on this product.

The solvent-weld connections create a strong, leak-free joint when properly prepared and cured. PVC is corrosion-resistant and designed for long-term performance in water applications, making it a durable choice for irrigation and utility piping under normal operating conditions.

If you’re considering alternatives, you can compare these on Fepy to the Atlas 90mm PN16 Equal Tee: