أنبوب السباكة البلاستيكي (PVC) من أطلس قياس (1") طول (6M) يباع بالقطعة

This pipe offers a versatile balance of strength and economy for domestic water lines, sprinkler branches, and general utility runs. With a 1" nominal diameter and a 6m length, it supports moderate-pressure water distribution while maintaining a smooth internal bore to reduce friction losses.

Class E indicates a medium-pressure capability suitable for typical household and light commercial water applications. It provides reliable performance under moderate flow and pressure conditions.

Key specs include: 1" diameter, 6m length, made from PVC material with a smooth-bore interior, Class E pressure rating, UV and chemical resistance, solvent-weld compatibility, and suitability for water distribution, irrigation, and drainage.

Yes. The pipe is UV-resistant and chemically resistant, making it suitable for outdoor use and environments where exposure to sunlight and chemicals is possible. It’s designed to perform in both outdoor and industrial settings.

Join it using solvent-weld methods. Select a compatible PVC primer and solvent cement rated for PVC pipe, clean and prime the pipe and fittings, apply cement, insert fittings fully, and hold until set. Use 1" compatible fittings (elbows, tees, couplings) for a secure, leak-free connection.

Typical steps: plan the run, cut the pipe to length with a proper pipe cutter, dry-fit to ensure alignment, clean and prime joints, apply solvent cement, connect fittings, and allow cement to cure as per the product’s guidelines. Secure the pipe to supports to prevent sagging and minimize movement.

Wear gloves and eye protection when cutting or handling PVC and when using solvent cement. Work in a well-ventilated area to avoid inhaling fumes, follow the solvent cement’s safety data sheet, and keep solvents away from open flames and children. Allow adequate cure time before pressurizing the system.

Use standard 1" PVC fittings designed for solvent-weld connections, including elbows, tees, couplings, and end caps. Pair with a compatible PVC primer and cement. Ensure fittings are rated for Class E pressure and match the pipe diameter for a proper seal.

Compared to other 1" PVC pipes with similar Class E ratings, this Atlas pipe emphasizes a smooth bore for reduced friction, a long 6m length to minimize joints, and a balanced price-to-performance value. For direct side-by-side options, you can explore alternatives like Atlas PVC Pipe 1in × 6m Class E and Atlas PVC Pipe 1in × 6m Class C on Fepy: https://www.fepy.com/product/atlas-pvc-pipe-1in-6m-class-e and https://www.fepy.com/product/atlas-pvc-pipe-1in-6m-class-c

If you’re prioritizing a balance of cost, ease of installation, and reliable medium-pressure performance, this pipe offers a favorable combination. The 6m length reduces the number of joints, and the smooth bore helps maintain pump efficiency in water and irrigation setups.

Yes. Plan straight runs where possible to minimize friction, avoid sharp bends, support the pipe adequately to prevent sagging, use proper clamps or supports at regular intervals, and ensure joints are clean and fully cured before pressurization. Store and handle pipes away from direct sun to minimize UV exposure before installation.

Store the pipe on a flat, level surface, off the ground, and away from direct sunlight to minimize UV exposure. Keep it dry and protected from extreme temperatures. Cut-to-length portions should be stored safely to prevent damage or warping, and keep fittings and cement in a cool, dry place until use.