أنبوب أطلس البلاستيكي قياس (110MM) طول (6M) بمعامل ضغط (Cl-10) يباع بالقطعة

Atlas DP Class 10 PVC Pipe is a 110 mm diameter, 6 m long PVC-U pipe designed for medium to high pressure applications. It carries a CL-10 rating and an 8 bar maximum operating pressure, making it suitable for industrial water management, drainage, spouting, and even certain gas-line scenarios when allowed by local codes.

CL-10 indicates a Class 10 performance standard, representing its ability to handle higher pressures within its size and material. For this pipe, it translates to reliable performance under medium to high pressure in compatible systems.

Key specs: 110 mm outer diameter, 6 m length, PVC-U material, Class 10 (CL-10) rating, maximum operating pressure around 8 bar, branded Atlas, suitable for medium/high pressure applications.

Best suited for industrial water management, drainage and spouting systems, and certain gas line applications where local codes permit. Its medium/high pressure rating makes it a robust choice for systems requiring reliable flow without frequent replacements.

To install: measure and mark the cut, cut square with a fine-tooth saw, deburr the edges, and assemble with compatible PVC solvent cement and primer. Use appropriate connectors, couplers, and brackets. Ensure clean, dry joints and follow standard pipe-fit guidelines for solvent-welded PVC systems.

The pipe is designed for medium to high pressure and is commonly used for water management and drainage. It can be used for certain gas lines where local regulations permit. Always verify local codes and consult a licensed professional for gas installations.

Check that your system’s pressure requirements align with the 8 bar maximum operating pressure, ensure you have the correct 110 mm fittings and solvent-weld connectors, and confirm that the installation follows PVC-U compatibility guidelines and local code requirements.

Class 10 provides a higher pressure rating (CL-10) than Class 8, making it more suitable for demanding or higher-pressure applications. For a lower-pressure alternative within the same size, you can review Atlas DP Class 8 here: https://fepy.com/product/atlas-dp-class-8-pvc-pipe-110mm-6m

Yes. Its PVC-U construction, CL-10 rating, and 8 bar operating capability make it well-suited for drainage and water management needs in industrial settings, as long as the installation follows local standards and the system remains within its pressure limits.

Store on level supports off the ground, away from direct sunlight when possible, and keep ends protected from debris. Avoid exposing to extreme temperatures for prolonged periods and protect from physical impact during handling and transport.

For applications demanding higher pressure resistance and longer service life, the Class 10 rating offers added reliability, potentially reducing replacement frequency. Compare with other CL-10 options on Fepy to assess price-per-performance for your specific use case.

The pipe is manufactured as PVC-U with a Class 10 (CL-10) rating and is designed to meet current industry standards for PVC piping used in medium/high-pressure applications. Always verify local regulatory requirements for your project.