Question 1

What is Atlas PVC End Cap used for?

Accepted Answer

Atlas PVC End Cap seals the exposed end of PVC piping, protecting edges from dirt, moisture and damage. It offers heat, abrasion and chemical resistance, with good mechanical strength for durable, long-term use and quick, easy, per-piece installation.

Question 2

What sizes are available and how do I pick the right one?

Accepted Answer

The end caps come in multiple diameters to match different pipe outer diameters. To select the right size, measure your pipe’s outer diameter (OD) and choose a cap whose inner diameter closely matches that OD. Sizes are commonly listed in metric (e.g., 20mm, 25mm, 32mm) or imperial equivalents.

Question 3

What material is this end cap made from and what are its properties?

Accepted Answer

It is made from high-quality PVC, providing excellent abrasion resistance, good mechanical strength and toughness. This makes the cap durable, resistant to heat and chemicals, and suitable for protecting pipe ends in a variety of environments.

Question 4

How do I install Atlas PVC End Cap?

Accepted Answer

Installation steps: (1) clean and dry the pipe end; (2) verify fit with a dry press-fit test; (3) for a permanent fit, apply a compatible PVC solvent cement or adhesive around the pipe end and cap and press firmly into place; (4) hold until set according to the adhesive’s instructions; (5) allow to cure as directed before pressurizing or handling.

Question 5

Is this end cap suitable for outdoor or moisture-exposed applications?

Accepted Answer

The cap provides a moisture barrier and edge protection, making it suitable for many indoor and outdoor uses. For long-term outdoor exposure, verify the product’s outdoor/UV suitability and consider additional protective measures if required by your environment.

Question 6

Will this end cap fit standard PVC pipes?

Accepted Answer

Yes, the Atlas PVC End Cap is designed to fit standard PVC piping sizes. Make sure to match the cap’s inner diameter (ID) to your pipe’s outer diameter (OD) for a secure fit.

Question 7

How should I measure to ensure I order the right size?

Accepted Answer

Measure the pipe OD with a caliper or ruler and compare it to the cap’s stated inner diameter. If you’re between sizes, choose the larger cap if it’s a slip-fit, or consult the size chart or customer support for guidance.

Question 8

How does Atlas PVC End Cap compare to other PVC end caps on Fepy?

Accepted Answer

For variety, you can compare with these alternatives on Fepy:
- Atlas PVC End Cap 25mm: https://fepy.com/product/atlas-pvc-end-cap-25mm-per-pcs
- PVC End Cap Slip-On 25mm: https://fepy.com/product/pvc-end-cap-slip-on-25mm-per-pcs
These options provide similar edge protection with different installation styles or sizes; check each product page for exact dimensions and compatibility.

Question 9

What are common use cases for this end cap?

Accepted Answer

Use cases include finishing and protecting exposed PVC pipe ends in DIY projects, plumbing or irrigation installations, commercial piping runs, workshop or lab setups, and any scenario where a clean, moisture-resistant pipe end is desired.

Question 10

What accessories or adhesives are recommended for installation?

Accepted Answer

For a permanent fit, use a compatible PVC solvent cement/adhesive suited to your pipe size. Have cleaning cloths handy, wear gloves, and follow adhesive manufacturer guidance for curing times. For temporary or slip-fit installations, you may use the cap without adhesive if the fit is snug.

Question 11

Are there safety or compliance considerations I should know about?

Accepted Answer

Handle PVC and any solvents with standard lab or workshop safety practices: use gloves, ensure good ventilation when using adhesives, and store away from heat. PVC materials commonly comply with broader safety standards (e.g., RoHS/REACH in many regions); always check the product’s spec sheet or certification details on Fepy for the exact compliance claims.

Question 12

What is the return policy for Atlas PVC End Cap?

Accepted Answer

For return terms, please refer to Fepy’s Returns Policy on the site. Typically, returns are considered within the stated window with items in original condition and packaging; check the current policy for eligibility and any return shipping requirements.

Item Name	Atlas Pvc End Cap
Brand	Atlas
Material	UPVC
Color	Dark Grey
Pressure Rating/ Flange	Pn16
Standards	Din 8063
Unit	Piece
Size	1/2",1",1 1/2",2",3",4"

غطاء نهاية الأنابيب (Atlas) المصنوع من البلاستيك (UPVC) قياس (1") المتين ذو المواصفات الميكانيكية العالية يباع بالقطعة

Features & Benefits

Specification

Attachments

Frequently Asked Questions