ضاغط الهواء (Balma) استطاعة (2HP) حصان بضغط (10Bar) بار باللون الأسود موديل (B26/100CM2)

Key specs include a 2 HP motor, maximum pressure of 10 bar, a compact B26/100cm2 design, an integrated oil-filled tank with adjustable oil level, an air filter to protect the motor from debris, a pressure gauge for easy monitoring, and a wheeled, portable housing for mobility.

It’s well suited for everyday DIY projects and light professional tasks such as inflating tires, powering small pneumatic tools (like nail guns or brad pistols), and light spray painting in a workshop or garage setting. Its 10 bar output and 2 HP motor provide steady performance for smaller load demands.

Place the unit on a level, stable surface in a well-ventilated area. Ensure the power supply matches the motor’s requirements and connect the air outlet hose to your tool or accessory. Check the oil level in the integrated tank and top up if needed, then power on and allow the compressor to build the initial pressure. Use the regulator to set your desired working pressure and monitor with the built-in gauge.

Use the built-in regulator to set the target working pressure. The gauge shows the current pressure, so start at a lower setting and gradually increase as needed for your tool. Do not exceed the maximum 10 bar rating and always monitor the gauge during use.

Regular maintenance includes checking and topping up the oil in the integrated oil-filled tank, draining any accumulated moisture from the tank, inspecting and cleaning the air filter if applicable, and inspecting hoses and fittings for wear or leaks. Routine visual checks and keeping the unit clean helps preserve performance and longevity.

Wear eye protection and hearing protection as needed. Use the unit in a well-ventilated area away from flammable liquids. Never exceed the 10 bar maximum, relieve pressure before performing maintenance, and unplug the unit before handling internal components. Keep hoses away from sharp edges and heat sources.

The listing notes an integrated oil-filled tank with adjustable oil level, an air filter, and a rugged wheeled housing with a carry handle for portability. It also includes the built-in pressure gauge and regulator for air output control.

If you’re considering alternatives on Fepy, you can view other Balma models to compare pressure, power, and portability. See the Balma listings here: https://fepy.com/search?q=Balma and specifically for higher or lower pressure variants: https://fepy.com/search?q=Balma+10+bar+compressor and https://fepy.com/search?q=Balma+8+bar+compressor. These pages aggregate Balma models available on Fepy for quick comparison.

Yes. With the built-in regulator and pressure gauge, you can set appropriate pressure for light spray painting tasks and to power small pneumatic tools. For heavier or industrial-grade air tools, ensure the tool requirements stay within the 10 bar maximum and that your supply is adequate for the tool’s air consumption.

First, ensure the unit is connected to a suitable power source and that the power switch is ON. Check the oil level in the integrated tank and top up if needed. Inspect for obvious air leaks in hoses or fittings, and verify the regulator is set correctly. If the unit still won’t start, consult the user guide for reset or service steps and ensure the air intake and filter aren’t blocked.

Consider the balance of features (2 HP motor, 10 bar max, integrated oil tank, filter, portable wheeled design) against your intended use. If you need portable, compact air supply for light to medium tasks, this Balma model offers a capable combination of performance and portability. Compare its price and target use against other Balma models on Fepy to ensure you’re getting the right balance of pressure, flow, and tool compatibility for your projects.