ملاط باسف ماستر إيماكو (N202) وزن (25KG)

Key features include fast setting, strong adhesive bond, resistance to water and weather, and chemical attack resistance. It is a ready to use one component mortar that is easy to mix and apply, and is suitable for damp surfaces with good shrinkage control.

MasterEmaco N202 bonds well to concrete, masonry and brickwork. For best results prepare the substrate by removing loose material, roughening smooth surfaces, and ensuring a clean, damp but not seeping surface before application.

Yes. The mortar is designed for both interior and exterior repairs, providing a durable repair solution for structural patches, grouting, and bedding in a variety of climates and weather conditions.

Mix MasterEmaco N202 with clean water to a smooth, lump free paste suitable for the intended application. Apply with a trowel or brush, pressing firmly to ensure good contact with the substrate and compacting to remove voids. Follow up with finishing as required for the repair work.

Yes. The product is described as fast setting and capable of being applied at temperatures down to 0 C, and it has good adhesion on damp surfaces when properly prepared.

MasterEmaco N202 is a fast setting mortar. The exact setting time depends on ambient temperature, humidity and thickness of the application. In typical conditions you can work with and finish the repair in a relatively short time after mixing.

Wear appropriate PPE such as gloves, eye protection and a dust mask when mixing and applying. Cement based materials can cause skin irritation and eye irritation, so avoid contact with skin and eyes, wash with plenty of water if contact occurs, and work in a well ventilated area.

Store the 25 kg bag in a dry, cool place and protect it from moisture. Keep the bag tightly closed when not in use to maintain product performance. Shelf life guidance is best confirmed on the product label or by Fepy support.

MasterEmaco N202 is a high performance fast setting cement based mortar. When comparing with alternatives on Fepy you can assess speed of setting, adhesion to damp substrates, weather and chemical resistance, and intended use. For a direct side by side you can review the BASF MasterEmaco line pages such as BASF MasterEmaco N201 and BASF MasterEmaco N203 to understand the small differences in setting time and application scope at https://fepy.com/product/basf-masteremaco-n201-25kg and https://fepy.com/product/basf-masteremaco-n203-25kg respectively.

Consider the durability, bond strength, and suitability for interior exterior repairs which can reduce rework and labour time. The 25 kg bag size offers a concentrated product for larger repairs and helps minimize waste. For specific return terms, contact Fepy support to confirm their policy on this product.

Yes. Proper substrate preparation is essential: clean, sound surfaces with any loose material removed, and surfaces slightly dampened but without standing water. Mix to a smooth paste, apply with a trowel or brush, ensure good compaction, and finish as required. For patching and bedding, build up in layers if necessary, allowing each layer to set before additional applications.