الفحمات الكربونية بوش الخاصة بسلسلة التجهيزات (GBH 2400) و السلسلة (2-24 D, 2-26, 2-28 DRE/DFR)

It’s compatible with the Bosch GBH 2400 family, including the 2-24 D, 2-26, and 2-28 DRE/DFR variants.

First unplug the tool. Remove the brush caps, pull out the worn brushes with springs, disconnect any wiring if needed, insert the new brushes with springs seated correctly, and reattach the caps. Finally, test the tool to ensure smooth operation.

Look for excessive sparking, a noticeable drop in power or performance, irregular RPM, unusual noises, or if the tool stops intermittently. These can indicate worn brushes that need replacement.

You’ll typically need a small screwdriver, pliers, and a clean workspace. Ensure the tool is unplugged and wear eye protection to guard against carbon dust.

Yes. Always unplug the tool, work in a well-ventilated area, wear eye protection, and avoid inhaling carbon dust. Handle brushes and springs carefully to avoid damage or misalignment.

Brush life varies with usage and load. In heavy-duty or high-demand tasks, brushes wear more quickly; with lighter use, they last longer. Regular inspection is the best way to determine replacement timing.

The package typically includes two carbon brushes with springs and any required mounting hardware for installation.

You can compare across compatible options on Fepy such as: Bosch carbon brush GBH 2400-2-24-D (https://fepy.com/product/bosch-carbon-brush-gbh-2400-2-24-d), Bosch carbon brush GBH 2400-2-26 (https://fepy.com/product/bosch-carbon-brush-gbh-2400-2-26), Bosch carbon brush GBH 2400-2-28-DRE (https://fepy.com/product/bosch-carbon-brush-gbh-2400-2-28-dre), and Bosch carbon brush GBH 2400-2-28-DFR (https://fepy.com/product/bosch-carbon-brush-gbh-2400-2-28-dfr). Compare compatibility, price, and included hardware to choose the best fit.

These brushes are specified for the GBH 2400 family. Using them in other models isn’t recommended unless the manufacturer explicitly states compatibility.

Avoid mixing worn and new brushes, ensure the springs are seated properly, don’t force the brushes into place, verify correct brush orientation, and keep the brush slots clean before installation to ensure proper seating.