لقمة المثقاب المطرقي من بوش (bosch) قياس (25X260mm) نوع (SDS+1) موديل (2608680294)

Diameter: 25 mm; Length: 460 mm; Shank: SDS-Plus (SDS-1); Tip: Carbide for long-lasting cutting performance; Reinforced flute design for efficient dust removal and heat management; Suitable for hammer drills.

SDS-Plus provides a secure fit with rapid, tool-free bit changes and better power transfer, reducing slippage and improving impact efficiency when drilling in hard materials the bit is designed for.

This bit is compatible with SDS-Plus hammer drills. It may not fit standard drill chucks without an SDS adapter. Check that your drill accepts SDS-Plus bits and is rated for the bit’s 25 mm diameter and 460 mm length.

Ideal for concrete, masonry, and stone. The carbide tip and heavy-duty design are optimized for hard construction materials and professional installations.

Yes. The 460 mm length is intended for deep holes and hard-to-reach areas. Use a drill with adequate choke length and consider using dust extraction to keep cuts clean and cool during long drilling operations.

1) Ensure the drill is off and unplugged. 2) Insert the bit into an SDS-Plus chuck and push until it locks (or use a quarter-turn SDS mechanism if your tool requires it). 3) Set a suitable drilling speed and begin at low speed, gradually increasing as you cut. 4) Apply steady pressure without forcing the bit, and use dust extraction if available.

Use dust extraction to reduce heat buildup, drill at appropriate speeds to avoid overheating, keep the bit clean and free of debris, avoid side loading, and store in a dry place to prevent tip deterioration.

Wear safety goggles and hearing protection, use gloves, secure the workpiece, keep hands and clothing away from the drill, and ensure the area is clear of bystanders. Avoid overheating the bit and stop drilling if you notice smoking or significant resistance.

You can explore similar 25 x 460 mm SDS-Plus bits from brands like Makita, DeWalt, and Bosch on Fepy. Examples: Makita options: https://fepy.com/search?q=Makita+SDS-Plus+25x460mm, DeWalt options: https://fepy.com/search?q=DeWalt+SDS-Plus+25x460mm, Bosch options: https://fepy.com/search?q=Bosch+SDS-Plus+25x460mm. These will show comparable lengths, diameters, and tip designs for heavy-duty masonry drilling.

The 25 mm carbide-tipped bit with a long 460 mm reach and SDS-Plus compatibility is built for durability and efficiency in hard materials, reducing tool changes and replacement frequency. Its design emphasizes heat management and dust removal, which can extend life in professional use.

After use, wipe away dust, inspect the carbide tip for wear, and store in a dry place. If the tip shows significant dulling, consider re-sharpening or replacing, and ensure the shank is clean before the next use to maintain secure engagement with the drill.

Avoid side loading, excessive force, and drilling with a dull bit. Don’t use non-SDS chucks without appropriate adapters, and avoid drilling without dust extraction in dusty environments, which can cause heat buildup and faster wear.