قرص الجلخ المعدني (Bosch) قياس (4.5") صناعة (Slovenia)

It's optimized for metal surfaces, especially steel and iron. Expect fast material removal with a relatively smooth finish and controlled chatter thanks to its low-vibration design. It handles rust removal, surface prep, and weld grinding while maintaining consistent performance across its life.

Diameter: 4.5 inches; compatible with standard 4.5\" angle grinders; low vibration design; optimized for metal grinding; high removal rate for faster work; made in Slovenia for precision manufacturing; designed for long life under heavy-duty use.

Unplug the grinder, remove the previous disc, attach the Bosch 4.5\" metal grinding disc using the correct flange and nut, and spin-fit to the grinder's arbor. Reconnect power, set the grinder to its rated RPM, wear safety glasses, gloves, and a face shield, and use a proper guard. Avoid side loading and apply even pressure for best results.

Always wear PPE (eye protection, gloves, hearing protection as needed) and use the grinder guard. Inspect the disc for cracks or damage before use, never exceed the maximum RPM shown on the disc, and replace if you notice vibration, excessive wear, or cracks. Use proper mounting hardware and follow the tool manufacturer's safety guidelines.

For reference, you can compare with Makita's 4.5\" Metal Grinding Disc (https://fepy.com/products/makita-metal-grinding-disc-4-5), DeWalt's 4.5\" Metal Grinding Disc (https://fepy.com/products/dewalt-metal-grinding-disc-4-5), and Norton Gemini 4.5\" Metal Grinding Disc (https://fepy.com/products/norton-gemini-metal-grinding-disc-4-5). The Bosch disc emphasizes low vibration and consistent wear, while some alternatives may offer different balance of price, life, and aggressiveness. Review each product page for RPM ratings, grind rate, and intended metal types.

Use cases include rust removal and metal surface prep, weld seam grinding, deburring and finishing of fabricated metal parts, and maintenance work on machinery and vehicles where a 4.5\" metal grinding disc is suitable.

Avoid grinding on the edge of the disc, use appropriate wheel speed, maintain steady, moderate pressure, and let the disc do the work. Use the correct guard and mounting hardware, and choose the right grinder speed to match the disc's RPM rating. Store and handle discs in a dry, clean environment to prevent cracks.

Typically you will receive a single Bosch 4.5\" metal grinding disc suitable for 4.5\" angle grinders. Check the listing on Fepy for exact inclusions.

Yes, this product is eligible for return under Fepy’s standard return policy. If you’re not satisfied, you can initiate a return according to the platform’s return process.

This disc is designed for standard 4.5\" angle grinders and typical 22.23 mm (7/8") arbors. Always verify your grinder’s arbor size, flange type, and maximum RPM before use to ensure compatibility.